The FL dies is used to size the cartridge case on full length.
In addition to a removable expander our FL dies have an integrated primer ejector pin.
All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort.
Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.
The correct position of the die in the press is set with the lock nut.br>
Specs:
- Thread: 7/8''
- Expander (diameter): 9.25mm
All relevant components have an article number for easy reordering if necessary.
You will find further instructions and assistance in selecting accessories and spare parts in the manual.>The manual can be found here<
Laddverktygstyp:
Full Length Sizing Die
Patron:
9.3 x 62 Mauser
Threads:
7/8''
Leveransvikt: 0,3kg
Leveranshöjd: 43mm
Leveransbredd: 43mm
Leveranslängd: 125mm