Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
080000852
Tools You Need To Remove & Replace Most Bolt-Action Triggers
The Brownells DIY Bolt Action Trigger Tool Kit contains the basic tools you need to remove a factory trigger and install an aftermarket replacement on many bolt action rifles, including the Remington 700. Installing a new trigger is easy when you have the right tools. The kit has three basic components, starting with the super-tough polyethylene Brownells Rifle Bench Block to provide a stable surface when driving pins out of the rifle action. The center V-groove keeps cylindrically-shaped parts steady so they won’t roll. The Grace Pin Punch Set has seven punches for driving out and installing action pins. It contains 1 starter punch, 1 center punch, and 5 drift punches that will not only serve for trigger projects but will cover 90% of your future pin removal needs. For trigger installation, you’ll first use these punches to drive out the pins holding the old trigger in the action. Then, you’ll use the punches to tap the pins back in, fixing the trigger into the rifle. The Nylon/Brass Combo Hammer will protect your rifle from scratches and scuffs during the trigger-installation process. The nylon head won’t mar metal if you have to tap a part into place, and the solid brass head provides extra force to drive punches in or out.To learn more about using the tools in the Brownells DIY Trigger-Replacement Kit, please watch the accompanying video, demonstrating the installation of a Timney trigger module on a Remington 700 rifle. The process is similar on most other bolt guns.Download the Brownells DIY Remington 700 Trigger Replacement Kit without Trigger Instructions.

SPECS: Kit contains Brownells Rifle Bench Block, Grace pin punch set with 1 starter punch, 1 center punch, 5 drift punches (1/16", 5/64", 3/32", 1/8" & 5/32" diameters), 1" nylon/brass hammer, and instructions.

1649 1649 1 SEK
Produktnr: 080000852
BROWNELLS DIY TRIGGER REPLACEMENT TOOL KIT Brownells DIY Avtryckarverktygssats för repetergevär innehåller de grundläggande verktygen du behöver för att ta bort en fabrikstillverkad avtryckare och installera en eftermarknadsersättning på många repetergevär, inklusive Remington 700. Det är enkelt att installera en ny avtryckare när du har rätt verktyg. Satsen har tre grundkomponenter, med början med den superstarka polyetenen Brownells Rifle Bench Block som ger en stabil yta när du driver ut stift ur gevärsmekanismen. Den centrala V-formade spåret håller cylindriska delar stadiga så att de inte rullar. Grace Stiftutdrivarsats har sju stift för att driva ut och installera mekanismstift. Den innehåller 1 startstift, 1 centrumstift och 5 drivstift som inte bara kommer att användas för avtryckarprojekt, utan täcker även 90% av dina framtida behov av stiftborttagning. För att installera avtryckaren kommer du först att använda dessa stift för att driva ut stiften som håller den gamla avtryckaren i mekanismen. Sedan använder du stift för att knacka in stiften igen, vilket fäster avtryckaren i geväret. Nylon/Mässing Kombihammaren skyddar ditt gevär från repor och skador under processen att installera avtryckaren. Nylonhuvudet kommer inte att skada metallen om du måste knacka en del på plats, och det solida mässingshuvudet ger extra kraft för att driva in eller ut stift.För att lära dig mer om hur du använder verktygen i Brownells DIY Avtryckarbyteskit, vänligen titta på den medföljande videon, som visar installationen av en Timney avtryckarmodul på ett Remington 700 gevär. Processen är liknande på de flesta andra repetergevär.Ladda ner instruktionerna för Brownells DIY Remington 700 Avtryckarbyteskit utan Avtryckare.
1649 SEK 0 1 649,00 kr *
Tyvärr kan produkten inte beställas.
Funktioner: Make: Remington Modell: 700

Produktinformation

Make: Remington Modell: 700 Leveransvikt: 0,662kg

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0E501.b




Tools You Need To Remove & Replace Most Bolt-Action Triggers
The Brownells DIY Bolt Action Trigger Tool Kit contains the basic tools you need to remove a factory trigger and install an aftermarket replacement on many bolt action rifles, including the Remington 700. Installing a new trigger is easy when you have the right tools. The kit has three basic components, starting with the super-tough polyethylene Brownells Rifle Bench Block to provide a stable surface when driving pins out of the rifle action. The center V-groove keeps cylindrically-shaped parts steady so they won’t roll. The Grace Pin Punch Set has seven punches for driving out and installing action pins. It contains 1 starter punch, 1 center punch, and 5 drift punches that will not only serve for trigger projects but will cover 90% of your future pin removal needs. For trigger installation, you’ll first use these punches to drive out the pins holding the old trigger in the action. Then, you’ll use the punches to tap the pins back in, fixing the trigger into the rifle. The Nylon/Brass Combo Hammer will protect your rifle from scratches and scuffs during the trigger-installation process. The nylon head won’t mar metal if you have to tap a part into place, and the solid brass head provides extra force to drive punches in or out.To learn more about using the tools in the Brownells DIY Trigger-Replacement Kit, please watch the accompanying video, demonstrating the installation of a Timney trigger module on a Remington 700 rifle. The process is similar on most other bolt guns.Download the Brownells DIY Remington 700 Trigger Replacement Kit without Trigger Instructions.

SPECS: Kit contains Brownells Rifle Bench Block, Grace pin punch set with 1 starter punch, 1 center punch, 5 drift punches (1/16", 5/64", 3/32", 1/8" & 5/32" diameters), 1" nylon/brass hammer, and instructions.

Nyhetsbrev