Extends rearward for increased leverage and easier, faster chambering after magazine changes. Rounded shape extends slightly away from the slide so it’s easier to engage but won’t catch on clothing or holster during a draw.
SPECS: Steel, blue or silver finish, includes spring. 1003/1004 fit all 3 pin models except Model 36.
Mer...
Kundernas betyg påModel 1003, Blue
Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 3
BAD PART(2010-09-09)
Orded this part from here received it , tried to install on my GLock 20 right away I noticed the loop wire looked awkward askew,Tried to install it anyway would not work.Wasted [$] I dont know how this passed QC. Should never have been sent to customer.
Best Glock slide release made(2012-05-01)
This slide release is the first accessory I put on every Glock I buy. You can release the slide easily without changing your grip. I am not sure why Gaston has made this an OEM factory part. I have now purchased 3 of the 1004 model and every one has worked perfectly.
Only add on for my Glocks(2010-09-08)
This is the only accessory I use on any of my Glocks, other than night sites. Dont leave home without it.
SHOULD BE STANDARD ON ALL GLOCKS!(2009-10-30)
Excellent aftermarket accessory, being left handed this part greatly improved my ability to release the slide, which was next to impossible with the factory slide release.
PERFECT FOR MODEL 21(2010-12-07)
It's very long which caused me to inadvertently lock back the slide when firing by bumping it with my thumb nuckle. The shorter, factory model works well on all my medium and large frame 9/40 models but is too short for my model 21. This one is PERFECT for my Model 21.
It didn't work(2012-03-10)
I have one of these in my G-19 and it has worked perfectly for years. When I bought one for my G-36 I noticed the tab did not look like the stock tab. When I took it to the range the gun would lock back on every round fired.
DO NOT INSTALL ON A G36(2012-04-15)
I bought one for a customers brand new G-36. When I took it to the range the gun would lock back on every round after firing around 2-3 magazines of ammo. After troubleshooting I noticed it didn't quite fit properly & chewed up his magazines! (Which I replaced) I should have taken photos. My recommendation is DO NOT INSTALL THIS PRODUCT ON A G36!
Run away don't walk!(2012-10-03)
Aro-Tek usually makes pretty good parts but this time they failed. First off the part is supossed to be "drop-in", This has to be fitted to your mag follower by using a small Dremel stone wheel because it's too big for the followers cut-out. This 1st problem caused the slide to lock open! When I called the maker he informed me that "was impossible" because every one gets fitted individually. I suggested maybe GLOCK changed the follower, he assured me he would have know of that issue. I RETURNED THIS PART FOR A REFUND.
Finish:
Blånerad
Kaliber:
9 mm (.355-.356)
Make:
Glock
Produkt detaljer
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
066100001 Model 36B, Blue Tillverkarens produktnummer: 2361003 Sträcker sig bakåt för ökad belåning och enklare, snabbare chambering efter tidningen förändringar. Rundade form sträcker sig något från bilden så det är lättare att engagera sig men kommer inte att fånga på kläder eller hölster under oavgjort.
687SEK0687,00 kr
*
Specialbeställningsartikel: Vänligen tillåt 5-8 veckor ytterligare behandlingstid.
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
066100400 Model 1004, Silver Tillverkarens produktnummer: 2001004 Sträcker sig bakåt för ökad belåning och enklare, snabbare chambering efter tidningen förändringar. Rundade form sträcker sig något från bilden så det är lättare att engagera sig men kommer inte att fånga på kläder eller hölster under oavgjort.
687SEK1687,00 kr
*
Lagervara
Funktioner:Finish: SilverKaliber: 9 mm (.355-.356)Make: Glock
Finish:
Silver
Kaliber:
9 mm (.355-.356)
Make:
Glock
Produkt detaljer
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Extends rearward for increased leverage and easier, faster chambering after magazine changes. Rounded shape extends slightly away from the slide so it’s easier to engage but won’t catch on clothing or holster during a draw.
SPECS: Steel, blue or silver finish, includes spring. 1003/1004 fit all 3 pin models except Model 36.
Mer...
Kundernas betyg påModel 1003, Blue
Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 3
BAD PART(2010-09-09)
Orded this part from here received it , tried to install on my GLock 20 right away I noticed the loop wire looked awkward askew,Tried to install it anyway would not work.Wasted [$] I dont know how this passed QC. Should never have been sent to customer.
Best Glock slide release made(2012-05-01)
This slide release is the first accessory I put on every Glock I buy. You can release the slide easily without changing your grip. I am not sure why Gaston has made this an OEM factory part. I have now purchased 3 of the 1004 model and every one has worked perfectly.
Only add on for my Glocks(2010-09-08)
This is the only accessory I use on any of my Glocks, other than night sites. Dont leave home without it.
SHOULD BE STANDARD ON ALL GLOCKS!(2009-10-30)
Excellent aftermarket accessory, being left handed this part greatly improved my ability to release the slide, which was next to impossible with the factory slide release.
PERFECT FOR MODEL 21(2010-12-07)
It's very long which caused me to inadvertently lock back the slide when firing by bumping it with my thumb nuckle. The shorter, factory model works well on all my medium and large frame 9/40 models but is too short for my model 21. This one is PERFECT for my Model 21.
It didn't work(2012-03-10)
I have one of these in my G-19 and it has worked perfectly for years. When I bought one for my G-36 I noticed the tab did not look like the stock tab. When I took it to the range the gun would lock back on every round fired.
DO NOT INSTALL ON A G36(2012-04-15)
I bought one for a customers brand new G-36. When I took it to the range the gun would lock back on every round after firing around 2-3 magazines of ammo. After troubleshooting I noticed it didn't quite fit properly & chewed up his magazines! (Which I replaced) I should have taken photos. My recommendation is DO NOT INSTALL THIS PRODUCT ON A G36!
Run away don't walk!(2012-10-03)
Aro-Tek usually makes pretty good parts but this time they failed. First off the part is supossed to be "drop-in", This has to be fitted to your mag follower by using a small Dremel stone wheel because it's too big for the followers cut-out. This 1st problem caused the slide to lock open! When I called the maker he informed me that "was impossible" because every one gets fitted individually. I suggested maybe GLOCK changed the follower, he assured me he would have know of that issue. I RETURNED THIS PART FOR A REFUND.