Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
700598350470 100037261
Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock. It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.   Disclaimer- You may mark your slide when using this mount to properly secure the mount. It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
799 799 1 SEK
Produktnr: 100037261
STRIKE INDUSTRIES G.U.M. UNIVERSAL OPTIC MOUNT FOR GLOCK
Tillverkarens produktnummer: SIGLOCKGUM 700598350470 Strike Industries är stolta över att presentera en revolutionerande ny produkt: The Universal (Optics) Mount för Glock. Det är den lägsta höjden-över-borr-fästet i branschen utan besväret med att skära i släden eller kostnaden för att köpa en eftermarknadssläde! Vi har lagt många timmar och skjutit 1000-tals skott med de flesta av de populärare rödpunktsiktena på marknaden utan några som helst problem! Detta inkluderar Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sikten, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom och Viper, samt många andra. Fästet i sig är säkrat till släden via svansen med 6 ställskruvar. Två i svanssnittet och en framför och bakom svansen samt två ytterligare för att förhindra någon förskjutning. Detta ger ett stadigt, robust och tåligt fäste som upprepade gånger kommer att hålla nollan. Annan medföljande monteringshårdvara är skruvar på 6mm, 8mm och 10mm (två av varje) som används för att passa och säkra de flesta av de populära siktena där ute. (Beroende på vilket sikte du har behöver du hitta de skruvar som korrelerar med ditt specifika sikte. Det finns två speciella skruvar för Trijicon RMR. När du har säkrat GUM till din släde och hittat det korrekta inlägget (två set av förstärkande inlägg ingår) för ditt sikte, gå vidare och montera ditt sikte på inlägget och använd de två längre säkringsskruvarna för att säkra ditt sikte till GUM. Ansvarsfriskrivning- Du kan märka din släde när du använder detta fäste för att ordentligt säkra fästet. Det rekommenderas starkt att du har en vapensmed för att installera GUM och använda rätt verktyg för installationen. Leupold Delta Point* kan monteras men inte med förstärkta inlägg för att säkra till 100%
799 SEK 0 799,00 kr *
Produkten kan beställas som restorder.
Funktioner: Basantal: 1-Piece Färg: Svart Make: Glock Material: Aluminum Stil: Adapter Bases

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: Glock Material: Aluminum Stil: Adapter Bases Leveransvikt: 0,046kg Leveranshöjd: 38mm Leveransbredd: 32mm Leveranslängd: 76mm




Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock. It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.   Disclaimer- You may mark your slide when using this mount to properly secure the mount. It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
Nyhetsbrev