EGW Savage 10-16 Round Back Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mer...
EGW Savage 10-16 Round Back Short Action Scope Bases. Lägg till mångsidigheten hos en Picatinny-skena i ett stycke till ditt hagelgevär utan att behöva borra eller gänga. Precisionstillverkad från extruderad aluminium med Picatinny-spår-och-rälavstånd som möjliggör snabba och enkla ändringar av ögonavståndet, samt stor flexibilitet i val av sikte. Borrade för att passa fabrikens fästpunkter för sikte på vapnets mottagare. Accepterar Picatinny eller Weaver siktringar. Lätta Tactical-fästen har en fräst mittkanal för viktreducering. Fullbreddsspår är kalibrerade enligt MIL-STD 1913-specifikationer till +/-0,002". Tillverkad från extremt styv, extruderad 6061 T6 aluminium. Inkluderar insexskruvar och nyckel i Torx®-utförande. EGW rekommenderar 20 tum lbs av vridmoment och en droppe blå loctite för montering.
Mer...
Kundernas betyg påEGW SAVAGE 10-16 ROUND BACK SHORT ACTION 0 MOA
Antal betyg: 4
Från brownells.com: 4
Medelbetyg: 4
Savage 10TR EGW 20 moa rail(2016-04-05)
Dropped right on to my Savage 10 TR holes lined up and everything!
a little problem(2010-08-21)
I had a customer who purchased a new savage 10 in .308, with an accutrigger. Of course mounting a good scope system was in order. The customer was on a budget and picked this mount to use. In short, the tollerances on the holes were way off. So far off that i couldnt get the all the screws in at all.The finish is great but the holes were way off. I ended up getting a much better mount.
Perfict fit and function.(2012-02-24)
I ordered this mount to replace the 3 sided mount that came with my Savage Model 10-BASK. This mount was an absolute perfect fit and came with the shorter screws for a complete installation. Make sure you follow the instructions and use GREEN loctite for the install and torque it to the 20 inch pounds specified in the instructions. You won't be disappointed!
Great mount(2016-10-30)
As a F Class shooter it has to work every time without fail. The base was easy to install on and looks great. Next time I need a scope base i will buy a EGW. They make great stuff.
Produktnr: 296000091 EGW SAVAGE 10-16 ROUND BACK SHORT ACTION 0 MOA Tillverkarens produktnummer: 41000841370105366 EGW Savage 10-16 Round Back Short Action Scope Bases. Lägg till mångsidigheten hos en Picatinny-skena i ett stycke till ditt hagelgevär utan att behöva borra eller gänga. Precisionstillverkad från extruderad aluminium med Picatinny-spår-och-rälavstånd som möjliggör snabba och enkla ändringar av ögonavståndet, samt stor flexibilitet i val av sikte. Borrade för att passa fabrikens fästpunkter för sikte på vapnets mottagare. Accepterar Picatinny eller Weaver siktringar. Lätta Tactical-fästen har en fräst mittkanal för viktreducering. Fullbreddsspår är kalibrerade enligt MIL-STD 1913-specifikationer till +/-0,002". Tillverkad från extremt styv, extruderad 6061 T6 aluminium. Inkluderar insexskruvar och nyckel i Torx®-utförande. EGW rekommenderar 20 tum lbs av vridmoment och en droppe blå loctite för montering.
749SEK0749,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Produktnr: 296000212 EGW SAVAGE 10-16 ROUND REAR SHORT ACTION 20 MOA Tillverkarens produktnummer: 41002841370105373 EGW Savage 10-16 Round Back Short Action Scope Bases. Lägg till mångsidigheten hos en Picatinny-skena i ett stycke till ditt hagelgevär utan att behöva borra eller gänga. Precisionstillverkad från extruderad aluminium med Picatinny-spår-och-rälavstånd som möjliggör snabba och enkla ändringar av ögonavståndet, samt stor flexibilitet i val av sikte. Borrade för att passa fabrikens fästpunkter för sikte på vapnets mottagare. Accepterar Picatinny eller Weaver siktringar. Lätta Tactical-fästen har en fräst mittkanal för viktreducering. Fullbreddsspår är kalibrerade enligt MIL-STD 1913-specifikationer till +/-0,002". Tillverkad från extremt styv, extruderad 6061 T6 aluminium. Inkluderar insexskruvar och nyckel i Torx®-utförande. EGW rekommenderar 20 tum lbs av vridmoment och en droppe blå loctite för montering.
749SEK7749,00 kr
*
Levernastid ca. 14-21 dagar. 7 st. i centrallagret.
EGW Savage 10-16 Round Back Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mer...
EGW Savage 10-16 Round Back Short Action Scope Bases. Lägg till mångsidigheten hos en Picatinny-skena i ett stycke till ditt hagelgevär utan att behöva borra eller gänga. Precisionstillverkad från extruderad aluminium med Picatinny-spår-och-rälavstånd som möjliggör snabba och enkla ändringar av ögonavståndet, samt stor flexibilitet i val av sikte. Borrade för att passa fabrikens fästpunkter för sikte på vapnets mottagare. Accepterar Picatinny eller Weaver siktringar. Lätta Tactical-fästen har en fräst mittkanal för viktreducering. Fullbreddsspår är kalibrerade enligt MIL-STD 1913-specifikationer till +/-0,002". Tillverkad från extremt styv, extruderad 6061 T6 aluminium. Inkluderar insexskruvar och nyckel i Torx®-utförande. EGW rekommenderar 20 tum lbs av vridmoment och en droppe blå loctite för montering.
Mer...
Kundernas betyg påEGW SAVAGE 10-16 ROUND BACK SHORT ACTION 0 MOA
Antal betyg: 4
Från brownells.com: 4
Medelbetyg: 4
Savage 10TR EGW 20 moa rail(2016-04-05)
Dropped right on to my Savage 10 TR holes lined up and everything!
a little problem(2010-08-21)
I had a customer who purchased a new savage 10 in .308, with an accutrigger. Of course mounting a good scope system was in order. The customer was on a budget and picked this mount to use. In short, the tollerances on the holes were way off. So far off that i couldnt get the all the screws in at all.The finish is great but the holes were way off. I ended up getting a much better mount.
Perfict fit and function.(2012-02-24)
I ordered this mount to replace the 3 sided mount that came with my Savage Model 10-BASK. This mount was an absolute perfect fit and came with the shorter screws for a complete installation. Make sure you follow the instructions and use GREEN loctite for the install and torque it to the 20 inch pounds specified in the instructions. You won't be disappointed!
Great mount(2016-10-30)
As a F Class shooter it has to work every time without fail. The base was easy to install on and looks great. Next time I need a scope base i will buy a EGW. They make great stuff.