Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
734307909284 100053418
The rugged Turret Press along with the Auto Disk Powder Measure, produce top quality handgun ammo in a hurry. A finished round with a few pulls of the lever. Large enough to handle monster belted magnum rifle cases. When it is time to change calibers, simply lock in a new turret and begin loading within seconds. In addition to the Turret Press and Auto Disk Powder Measure; the kit includes the Lee Safety Scale, unmatched for sensitivity, a primer pocket cleaner, cutter and lock stud to trim the cases and a chamfer tool to deburr cases after trimming. For handgun reloaders, a set of Lee Dies is all that is required to complete this reloading outfit. All this at a price that will allow you to pay for your investment in a matter of hours. This press is ideal for handgun loading and with experienced hands, you can load over 200 rounds per hour. For those who wish to use the press as a single station press, the auto index feature can be disabled in seconds and then re-enabled in the same amount of time. For rifle reloaders, the maximum cartridge length that can be reloaded on this press is 2.3125 inches. Any cartridge longer than this you will have to dis-engage the auto index and manually turn the turret by hand. In addition, you will need to purchase a rifle charging die, double disk kit, and appropriate case length gauge to trim your brass after sizing. Please note:  the Turret press pictured is mounted on the Lee Bench Plate, this is sold as an accessory.
6199 6199 1 SEK
Produktnr: 100053418
LEE PRECISION LEE 4 HOLE TURRET PRESS KIT
Tillverkarens produktnummer: 90928 734307909284 Den robusta Turret Press tillsammans med Auto Disk Powder Measure producerar ammunition av högsta kvalitet för handeldvapen i en hast. En fÀrdig patron med nÄgra drag av spaken. TillrÀckligt stor för att hantera enorma bÀltade magnumgevÀrskalibrar. NÀr det Àr dags att byta kaliber, lÄs bara in en ny torn och börja ladda inom nÄgra sekunder. Förutom Turret Press och Auto Disk Powder Measure; kitet inkluderar Lee Safety Scale, oövertrÀffad för kÀnslighet, en primerfickrensare, kutter och lÄsstift för att trimma hylsorna och ett avgradningsverktyg för att avgrada hylsorna efter trimning. För handladdare av pistoler Àr ett set Lee Dies allt som krÀvs för att komplettera denna laddningsutrustning. Allt detta till ett pris som gör att du kan betala av din investering pÄ bara nÄgra timmar. Denna press Àr idealisk för laddning av pistoler och med erfarna hÀnder kan du ladda över 200 skott i timmen. För de som önskar anvÀnda pressen som en enkelstationspress kan autoindexfunktionen inaktiveras pÄ nÄgra sekunder och sedan Äteraktiveras lika snabbt. För gevÀrsladdare Àr den maximala patronlÀngden som kan laddas om pÄ denna press 2.3125 tum. För patroner lÀngre Àn sÄ mÄste du koppla frÄn autoindex och manuellt vrida tornet för hand. Dessutom behöver du köpa en rifle charging die, double disk kit och lÀmpligt mÄtt för hylslÀngd för att trimma ditt mÀssing efter storleksanpassning. Observera: Turret pressen pÄ bilden Àr monterad pÄ Lee Bench Plate, detta sÀljs som ett tillbehör.
6199 SEK 4 6 199,00 kr *
Levernastid ca. 14-21 dagar.
4 st. i centrallagret.

Top takeaways

  1. Turret Press och Auto Disk Powder Measure gör det möjligt att snabbt producera högkvalitativ ammunition för handeldvapen.
  2. Kit inkluderar Lee Safety Scale, primerfickrensare, kutter, lÄsstift och avgradningsverktyg för omfattande laddningsbehov.
  3. Pressen kan hantera bÄde pistoler och gevÀr, med möjlighet att ladda över 200 skott i timmen för pistoler.

Produktinformation

Leveransvikt: 5,141kg Leveranshöjd: 762mm Leveransbredd: 315mm LeveranslÀngd: 381mm

Produkt detaljer

Tillverkas i USA




🚀 UpptĂ€ck LEE PRECISION 4-Hole Turret Press Kit – perfekt för snabb och högkvalitativ ammunitionsladdning. Komplett kit med alla nödvĂ€ndiga verktyg. LĂ€r dig mer! đŸ”«đŸ’„

The rugged Turret Press along with the Auto Disk Powder Measure, produce top quality handgun ammo in a hurry. A finished round with a few pulls of the lever. Large enough to handle monster belted magnum rifle cases. When it is time to change calibers, simply lock in a new turret and begin loading within seconds. In addition to the Turret Press and Auto Disk Powder Measure; the kit includes the Lee Safety Scale, unmatched for sensitivity, a primer pocket cleaner, cutter and lock stud to trim the cases and a chamfer tool to deburr cases after trimming. For handgun reloaders, a set of Lee Dies is all that is required to complete this reloading outfit. All this at a price that will allow you to pay for your investment in a matter of hours. This press is ideal for handgun loading and with experienced hands, you can load over 200 rounds per hour. For those who wish to use the press as a single station press, the auto index feature can be disabled in seconds and then re-enabled in the same amount of time. For rifle reloaders, the maximum cartridge length that can be reloaded on this press is 2.3125 inches. Any cartridge longer than this you will have to dis-engage the auto index and manually turn the turret by hand. In addition, you will need to purchase a rifle charging die, double disk kit, and appropriate case length gauge to trim your brass after sizing. Please note:  the Turret press pictured is mounted on the Lee Bench Plate, this is sold as an accessory.
Lagervara
1 099,00 kr * 899,00 kr - 1 099,00 kr*
3,5
Lagervara
139,00 kr * 139,00 kr - 169,00 kr*
5
Lagervara
289,00 kr *
0