Drar ut bucklade ventilationsribbor på hagelgevär på bara minuter. Enkel att fästa och snabb att använda. Mässingsbryggan lämnar inga märken på ribbans ovansida; stålkäftar som justerar sig själva.
Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 5
Cheaper than a new rib!(2010-03-09)
I used this tool to remove two severe dents in the rib of my Ruger O/U. I was very tentative at first, but once I got used to the pressure it worked like a charm. You do have to slightly over tighten to ensure the dent is removed. A heavy hand could convert a dent to a hump. Patience and checking with a steel rule will keep you in a great place.
Handy little tool(2012-07-10)
Neatest thing since a pocket on a shirt. Pulls dinged ribs right up. Like the other reviewer noted, you do need to pull it up a little higher than flat and check it with a flat edge, but works like it's supposed to.
works graet, easy to use (2014-12-01)
I have used this tool about 10 times and it has worked great, easy and fast, One great tool.
Better than a gunsmith (2015-06-13)
Simple to use tool that works! I used this on my baby a Perazzi, did not want to ship the gun off. Prior dent is not noticeable after a bit of cold blue touch up. Use with caution, adjust, measure and repeat.
Christmas surprise (2016-12-26)
Unsightly crimp in my over under vent rib near the mid sight. Took it to three gunsmiths. Two refused to fix it and one wanted $150 and to remove my mid sight mark. I said no and lived with the crimp for a year. Then this Christmas my wife ordered the Murray vent rib tool from Brownells.. Was just going to test the fit of the tool and realized I could fix it. Took me seconds and my barrell was good as new. Every shotgunner with vent ribs needs this tool.
Produktnr: 563100000 MURRAYS VENT RIB TOOL Tillverkarens produktnummer: NONE Drar ut bucklade ventilationsribbor på hagelgevär på bara minuter. Enkel att fästa och snabb att använda. Mässingsbryggan lämnar inga märken på ribbans ovansida; stålkäftar som justerar sig själva.
1199SEK341 199,00 kr
*
Levernastid ca. 14-21 dagar. Mer än 10 st. i centrallagret.
Drar ut bucklade ventilationsribbor på hagelgevär på bara minuter. Enkel att fästa och snabb att använda. Mässingsbryggan lämnar inga märken på ribbans ovansida; stålkäftar som justerar sig själva.
Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 5
Cheaper than a new rib!(2010-03-09)
I used this tool to remove two severe dents in the rib of my Ruger O/U. I was very tentative at first, but once I got used to the pressure it worked like a charm. You do have to slightly over tighten to ensure the dent is removed. A heavy hand could convert a dent to a hump. Patience and checking with a steel rule will keep you in a great place.
Handy little tool(2012-07-10)
Neatest thing since a pocket on a shirt. Pulls dinged ribs right up. Like the other reviewer noted, you do need to pull it up a little higher than flat and check it with a flat edge, but works like it's supposed to.
works graet, easy to use (2014-12-01)
I have used this tool about 10 times and it has worked great, easy and fast, One great tool.
Better than a gunsmith (2015-06-13)
Simple to use tool that works! I used this on my baby a Perazzi, did not want to ship the gun off. Prior dent is not noticeable after a bit of cold blue touch up. Use with caution, adjust, measure and repeat.
Christmas surprise (2016-12-26)
Unsightly crimp in my over under vent rib near the mid sight. Took it to three gunsmiths. Two refused to fix it and one wanted $150 and to remove my mid sight mark. I said no and lived with the crimp for a year. Then this Christmas my wife ordered the Murray vent rib tool from Brownells.. Was just going to test the fit of the tool and realized I could fix it. Took me seconds and my barrell was good as new. Every shotgunner with vent ribs needs this tool.