Varukorgen är tom.

Varukorg

0247-41085

Prenumerera på nyhetsbrev

BROWNELLS
1911 SLIDE FITTING BARS

080745001

Beskrivning
Betyg (3)

Remove Slide "Play" Accurately & Professionally

Surface ground and hardened tool steel bars in ten thicknesses - Recommended by agency armorers and top pistolsmiths as the most accurate way to remove vertical slide “play” from the 1911 Auto, its variations and copies. May be slower than the quick-and-dirty methods, but gives an infinitely more accurate and professional job. Basic procedure as follows: Measure gun’s slide rail thickness; place closest-sized Slide Fitting Bar in frame “way”; tap frame rail with light hammer to close the “ways” space down to match the slide rail thickness. Complete instructions included.

SPECS: 4" (10.2cm) L x 1" (2.5cm) W. stainless steel, heat treated. + .0000"/– .0005" (.0127mm) tolerances. Set includes 10 slide fitting bars, and a hardwood divider tray, all in a tough, polypropylene bench storage box.

Mer...

Kundernas betyg påBROWNELLS 1911 SLIDE FITTING BAR BOX AND TRAY

Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 3,7

Not worth the time (2010-10-21)

Ok make sure to get ALL the information before ordering this. It is going to cost you.

1) Need to have an excellent frame clamp or the darn thing will keep moving around.
2) need to make sure to get the Micro Meter and that is another 300 dollars.
3) Get a smooth hammer (heavy one) you will need to beat on the rails on the frame and it does make a lot of marks. The hammer i purchased did more damage than good.

Not sure what the answer is to make the items work, maybe more skill but i will say that it did not work well for me.

nice (2010-10-28)

These are tools for the professional; well made, precision ground and essential for propper fit. if you know what you are doing, these are the cats meow.

Work well, IF you know what your doing (2015-02-15)

I've used these extensively to lower frame rails on 1911's. They work, BUT It requires patience and proper setup and tooling. Your frame has to be well supported with an aluminum mag well spacer and locked up in some type of non marring vice. As for peening the rails, A well polished tip on a wide punch can do the job but for a truly professional look I suggest you invest in the speciality peening wedges made just for this. If you decide to use a ball peen hammer, make sure the surface on the flat side is mirror polished. If you do the above, take your time you'll do fine.

Läs 3 fler betyg på brownells.com

549 4299 12 SEK

Produktnr: 080745001
BROWNELLS 1911 SLIDE FITTING BAR BOX AND TRAY Ytslipat och härdat verktygsstål barer i tio tjocklekar - rekommenderas av byrån armorers och övre pistolsmiths som det mest exakta sättet att ta bort vertikala bild "play" från 1911 Auto, variationer och kopior. Kan vara långsammare än metoderna som slarvigt, men ger ett oändligt mer korrekt och professionellt arbete. Grundläggande förfarande enligt följande: mäta gun slide rail tjocklek. plats närmast storlek passande skjutreglaget i ramen "väg"; Knacka på ram järnväg med lätta hammare att stänga "sätt" utrymmet till match slide rail tjocklek. Fullständiga instruktioner ingår.

699 SEK 1 699,00 kr *

1 på lager

Funktioner: Make: 1911 Modell: Government, Commander, Officers

BROWNELLS 1911 SLIDE FITTING BARS

Kundernas betyg påBROWNELLS 1911 SLIDE FITTING BAR BOX AND TRAY

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Produktinformation

Produkt detaljer

Kundernas betyg påBROWNELLS 1911 SLIDE FITTING BAR BOX AND TRAY

BROWNELLS
1911 SLIDE FITTING BARS