Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

HARRISON DESIGN & CONSULTING
1911 BEAVERTAIL GRIP SAFETY

100020925
Harrison Design Extreme Service Beavertail Grip Safeties are CNC machined from bar stock, either stainless or carbon steel  and are engineered to allow the craftsman to create that "hairline" joint beavertail installation that everyone wants. Dimensions are left oversize in the critical places, such as in the width of the center lug of the beavertail that fits between the frame tangs, eliminating the need to weld in between the frame tangs in the majority of cases. The side to side dimension of the 'tail is also left oversize to allow fitting flush with the flats of the frame. The fitting radii are machined undersize at a .240" radius to allow enough material for proper fitting of the beavertail to frames that have already been machined for a .250" beavertail by the factory and left a bit looser than desired. The blocking arm comes with the "Take Down" notch already cut for you.
1449 1449 1 SEK
Produktnr: 100020925
HARRISON DESIGN & CONSULTING EXTREME SERVICE BEAVERTAIL GRIP SAFETY STAINLESS STEEL
Tillverkarens produktnummer: HD482 Harrison Design Extreme Service Beavertail Grip Safeties är CNC-bearbetade från stångmaterial, antingen rostfritt eller kolstål, och är konstruerade för att möjliggöra för hantverkaren att skapa den där "hårfin" fogningen vid installation av beavertail som alla önskar. Dimensionerna är avsiktligt för stora på kritiska ställen, som i bredden på beavertails mittklack som passar mellan ramens 'tangs', vilket eliminerar behovet av att svetsa mellan ramens 'tangs' i de flesta fall. Sid-till-sid dimensionen av 'tail' är också för stor för att möjliggöra en passning som är i nivå med ramens platta ytor. De radier som används för passning är maskinbearbetade till en radie på 0,240" för att lämna tillräckligt med material för en korrekt passning av beavertail till ramar som redan har maskinbearbetats för en 0,250" beavertail av tillverkaren och lämnats lite lösare än önskat. Blockeringsarmen levereras med redan utsågad "Take Down"-skåra.
1449 SEK 0 1 449,00 kr *
Produkten kan beställas som restorder.
Funktioner: Finish: Natural Make: 1911

Produktinformation

Finish: Natural Make: 1911 Leveransvikt: 0,039kg Leveranshöjd: 19mm Leveransbredd: 76mm Leveranslängd: 140mm

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.x



Harrison Design Extreme Service Beavertail Grip Safeties are CNC machined from bar stock, either stainless or carbon steel  and are engineered to allow the craftsman to create that "hairline" joint beavertail installation that everyone wants. Dimensions are left oversize in the critical places, such as in the width of the center lug of the beavertail that fits between the frame tangs, eliminating the need to weld in between the frame tangs in the majority of cases. The side to side dimension of the 'tail is also left oversize to allow fitting flush with the flats of the frame. The fitting radii are machined undersize at a .240" radius to allow enough material for proper fitting of the beavertail to frames that have already been machined for a .250" beavertail by the factory and left a bit looser than desired. The blocking arm comes with the "Take Down" notch already cut for you.
Nyhetsbrev