Varukorgen är tom.

Varukorg

0247-41085

Prenumerera på nyhetsbrev

BROWNELLS
AR-15/M16 SIGHT WRENCHES

873781000596 078015002

Models For A1 & A2 Make Sight Adjusting Quick & Easy

Even tho' you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've tried know it's just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy.

SPECS: 1-3/8" (3.5cm) long x ¾" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Mer...

Modeller för A1 & A2 Gör Siktesjustering Snabb & Enkel

Även om man ska kunna justera dessa sikten med inget mer än en patron, vet de som har försökt att det inte är så enkelt. Detta oerhört praktiska lilla Siktnyckel gör jobbet, snabbt och enkelt.

SPECIFIKATIONER: 1-3/8" (3.5cm) lång x ¾" (19.0mm) dia. Blånerat stål. Modeller för A1, fem-taggar (justerar fram och bak) och A2, fyra-taggar.

Mer...

Kundernas betyg påBROWNELLS A2/M16 SIGHT WRENCH

Antal betyg: 21
Från brownells.com: 21
Medelbetyg: 2,9

Nice product! (2009-10-02)

Hard to find quality US made tools for sight adjustment anymore. This is a robust tool, and compact enough for take along.

ok tool but great customer service (2009-10-20)

so the first time i used it one of the teeth broke off and the rest got bent up real bad. i emailed Brownells and they let me exchange it for a new one. [...] im not sure if my sights are a little tight or the tool is a little weak. my new one works great, i just have to be gentle with it.

A2 sight wrench (2010-01-05)

Just used this wrench to set the sights on my Magpul BIUS. Worked great. The teeth seems a little thin, but still a value at this price.

Limited Use (2010-04-27)

I'm sure it is perfect for most A2 sights. It absolutely will not adjust Troy HK style BUIS. The shaft is too short to reach the base. I wish there had been a review addressing this before I bought it, but I'm not going to say that it is a bad product. I will keep it for other sights.

Too Short! (2010-10-15)

I'm sure this works fine on most AR sights, but not my new A.R.M.S. 71F front sight. The narrow barrel is too short to reach the detent because the knurled body hits the sight blades and stops right there. It just needs to be a bit longer, or the bevel at the shoulder needs to be narrower to make it a useful tool for some of the newer sight styles currently on the market.

Yes!finally a front site tool that works (2011-02-07)

Using another tool I could not lower my front post site any more..with this... 3 whole revolutions more! Time to go see if now my rifle isn't shooting low! I doubt it will last for long as the teeth are small..but it worked this time, hopefully it will have a long life.

Works good (2011-11-17)

Works good, adjusts the sight, and it will fit inside Brownell's AR-15 buttstock pouch cleaning kit, which is handy if you have that kit and an A2 buttstock.

Not strong enough (2012-03-27)

This tool is very convenient for adjusting that pain in the rear front site post, however, the prongs keep breaking. I have gone threw two of these so far. Some broke off while adjusting, the others in the padded compartment in my range bag.

No go on pre-ban Bushmasters (2012-08-04)

May work for most people but on three different pre-ban A2 Bushmasters it just did fit. The tool's front sight cylinder had the proper number of pins but was too small in diameter for the pins to fit into the notches on the front sight post.

Worked Perfect (2012-08-13)

Recently purchased a new rifle with A2 front sights and I could not get them to budge the way I was taught in the Army. My frustration at not being able to get my rifle zeroed with under 18 rounds was angering me! I even tried holding the detent down with a small nail and trying to turn the post with my leatherman and no movement. So I purchased this tool and within five minutes of it being opened from the plastic bag and nine rounds later...3 holes in the ring of the 25m target with iron sights and only resting on my ammo can in the prone position. The folks that are breaking these things must be holding their mouth wrong or something. It works great!

Works but it is a precise fit (2012-09-12)

The first time I tried to use the A2 tool I was at the range with three pre-ban A2 style Bushmasters and couldn't get it to fit the front post. I got frustrated, gave up and used a punch. HOWEVER, on a return trip with the same Bushmasters a little more patience proved the tool does fit properly. In fact it worked just fine, it's just a more precise fit than I was expecting the first go round. I expected a sloppy fit but it is a precision fit. Works better than a punch or unfired round. It left no marks, scars or mars. Feel much better about the purchase now. Four stars simply because I think this may be a case where a little slop is needed otherwise it's a five.

save your money (2012-09-12)

It does not depress the detent at all. If you depress the detent with something else, you can than adjust the sight with this tool, but needing an aditional tool kind of defeats the purpose

A well made, useful and useable tool (2014-02-27)

Because of the low ratings, I almost did not buy this tool but I am glad I took a chance. The tool is well made, machined from a solid chunk of steel. It fit perfectly in my front site, although because of some comments I knew the fit would be snug and allowed myself a few seconds to find the proper alignment. I removed the site and replaced it literally within seconds, unlike when using a separate tool to depress the detent. It also allows sufficient "feel" to make adjustments one click at a time, and so makes adjusting the front site at the range easier.

Fits my DDM4v1 stock sights perfectly (2014-12-20)

The sight wrench fits the stock iron sights on my DDM4v1 very well and allows me to adjust the sights without having to use two hands! The rifle is brand new and the sights were not movable with the tried and true bullet method so this tool was the perfect item for the job.

works like a charm (2015-01-18)

Given the reviews I'd read, I was unsure this thing would work. Like others I couldn't get a bullet to hold down the release button and turn the post on my Rock River A2, but on my first attempt, this wrench worked like a charm.

poor quality (2011-08-24)

one prong on the front sight was bent before it was even out of the package. When I attempted to straighten, it broke off.

You want the other AR15 Sight Wrench (2011-12-03)

The diameter of the 4 pronge end of the wrench was too wide to fit in my Bushmaster A2 upper.

Might work with a little grinding (2012-02-16)

The elevation end works the front sight OK. The windage end does not have enough prong length to retract the index pin. gonna have to get the Dremel out...

Avoid this tool (2012-05-04)

I don't know how this got into Brownell's catalog. It is so flimsy. The second time I went to adjust my front sight, one of the little nubs broke off in the assembly. You can get a better result by depressing the detente pin with an 8penny nail and turning the post with the eraser end of a common pencil.

ar15 sight tool (2012-05-31)

the four nubs on the tool are to short to adjust my yankee hill front sights..would not work on anybodys else at the range either..a very poor product

a-1 a-2 sight wrench (2016-01-08)

bought this a-2 wrench to adjust front sights. barrel part of wrench

will not even get close enough to turn the sight. can not even push the detent down with it. it works in there video, but what they sent me was a waste of my money. don't waste yours

Läs 21 fler betyg på brownells.com

279 339 2 SEK

Produktnr: 078015002
BROWNELLS A2/M16 SIGHT WRENCH
Tillverkarens produktnummer: 1519A2 873781000596 Även om man ska kunna justera dessa sikten med inget mer än en patron, vet de som har försökt att det inte är så enkelt. Detta oerhört praktiska lilla Siktnyckel gör jobbet, snabbt och enkelt.

339 SEK 0 339,00 kr *

Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.

Funktioner: Make: AR-15

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Produktinformation

Make: AR-15 Leveransvikt: 0,086kg Leveransbredd: 83mm Leveranslängd: 146mm

Produkt detaljer

Tillverkas i USA

Produktnr: 078015001
BROWNELLS A1 SIGHT WRENCH
Tillverkarens produktnummer: 1519 Även om man ska kunna justera dessa sikten med inget mer än en patron, vet de som har försökt att det inte är så enkelt. Detta oerhört praktiska lilla Siktnyckel gör jobbet, snabbt och enkelt.

279 SEK 43 279,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Make: AR-15

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Models For A1 & A2 Make Sight Adjusting Quick & Easy

SPECS: 1-3/8" (3.5cm) long x ¾" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Mer...

Modeller för A1 & A2 Gör Siktesjustering Snabb & Enkel

SPECIFIKATIONER: 1-3/8" (3.5cm) lång x ¾" (19.0mm) dia. Blånerat stål. Modeller för A1, fem-taggar (justerar fram och bak) och A2, fyra-taggar.

Mer...

Kundernas betyg påBROWNELLS A2/M16 SIGHT WRENCH

Antal betyg: 21
Från brownells.com: 21
Medelbetyg: 2,9

Nice product! (2009-10-02)

Hard to find quality US made tools for sight adjustment anymore. This is a robust tool, and compact enough for take along.

ok tool but great customer service (2009-10-20)

A2 sight wrench (2010-01-05)

Just used this wrench to set the sights on my Magpul BIUS. Worked great. The teeth seems a little thin, but still a value at this price.

Limited Use (2010-04-27)

Too Short! (2010-10-15)

Yes!finally a front site tool that works (2011-02-07)

Works good (2011-11-17)

Works good, adjusts the sight, and it will fit inside Brownell's AR-15 buttstock pouch cleaning kit, which is handy if you have that kit and an A2 buttstock.

Not strong enough (2012-03-27)

No go on pre-ban Bushmasters (2012-08-04)

Worked Perfect (2012-08-13)

Works but it is a precise fit (2012-09-12)

save your money (2012-09-12)

It does not depress the detent at all. If you depress the detent with something else, you can than adjust the sight with this tool, but needing an aditional tool kind of defeats the purpose

A well made, useful and useable tool (2014-02-27)

Fits my DDM4v1 stock sights perfectly (2014-12-20)

works like a charm (2015-01-18)

poor quality (2011-08-24)

one prong on the front sight was bent before it was even out of the package. When I attempted to straighten, it broke off.

You want the other AR15 Sight Wrench (2011-12-03)

The diameter of the 4 pronge end of the wrench was too wide to fit in my Bushmaster A2 upper.

Might work with a little grinding (2012-02-16)

The elevation end works the front sight OK. The windage end does not have enough prong length to retract the index pin. gonna have to get the Dremel out...

Avoid this tool (2012-05-04)

ar15 sight tool (2012-05-31)

the four nubs on the tool are to short to adjust my yankee hill front sights..would not work on anybodys else at the range either..a very poor product

a-1 a-2 sight wrench (2016-01-08)

Läs 21 fler betyg på brownells.com

BROWNELLS AR-15 FRONT SIGHT BENCH BLOCK
AR-15 FRONT SIGHT BENCH BLOCK

BROWNELLS

Lagervara

949,00 kr *

Sikte Verktyg

3,4

BROWNELLS AR-15/M16 LOWER RECEIVER VISE BLOCK
AR-15/M16 LOWER RECEIVER VISE BLOCK

BROWNELLS

Lagervara

359,00 kr * 359,00 kr - 849,00 kr*

Bänk och Skruvstäd

3,6

UNCLE MIKES 1" QD-100 LOOPS ONLY, 2-PAK
UNCLE MIKE'S QUICK DETACH 100 SLING SWIVEL

UNCLE MIKES

Lagervara

289,00 kr * 289,00 kr - 399,00 kr*

Flush fäste till Rembyglar | Gevär Rembyglar

COLT AR15A4 BOLT RING, 3 PACK
AR15A4 BOLT RING, 3 PACK

COLT

Order kan placeras

179,00 kr *

LUTH-AR AR-15 MBA-3/MBA-4 CARBINE CASTLE NUT BLACK STEEL
AR-15 MBA-3/MBA-4 CARBINE CASTLE NUT

LUTH-AR

Lagervara

129,00 kr *

Buffer Tub

BROWNELLS BUFFER TUBE 2 POSITION MIL-SPEC ANODIZED GREY
AR-15/M16 BUFFER TUBE 2 POSITION MIL-SPEC RETRO

BROWNELLS

Lagervara

499,00 kr *

Buffer Tuber

KNS PRECISION MULTI POST FRONT SIGHT PACK STEEL BLACK
AR-15 POST FRONT SIGHT PACK

KNS PRECISION

Order kan placeras

549,00 kr *

Främre Sikte

BROWNELLS A2 AR-15 SIGHT WRENCH
AR-15 SIGHT WRENCH

BROWNELLS

Lagervara

279,00 kr * 269,00 kr - 319,00 kr*

Nyckelsatser

Logga in

Har du glömt lösenordet?
Registrering

SOCIAL MEDIA

Facebook

HEMSIDA

PRODUKTKATEGORI

BESTÄLLNING

KUNDSERVICE

Välkommen!

Välkommen till brownells.se, den ledande leverantören av skyttetillbehör, unika vapendelar, vapenrelaterade produkter, laddutrustningar, laddverktyg, kulor & hylsor, optik & vapensmide samt andra produkter för att underhålla, reparera och uppgradera dina vapen! Du kommer att hitta över 90.000 produkter till bra priser, stor lagerhållning samt brett utbud!

Vårt erbjudande:

Gillar du att skjuta, är vapensmed eller jägare, är detta platsen för dig! Skyttar, professionella vapensmeder, hobbyanvändare, militär/polis och pistolanvändare vänder sig till brownells.se för att hitta vapendelar och produkter av hög kvalitet.

cf-web-badges-e-ltgray