Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

W. FREAR INNOVATIONS
COLLIMATOR ELEVATOR

100002512
Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

1449 1449 1 SEK
Produktnr: 100002512
W. FREAR INNOVATIONS COLLIMATOR ELEVATOR
Tillverkarens produktnummer: COLLELEV Precisionstillverkad anordning som avsevärt utökar användningen och räckvidden för din optiska kollimator för gevär som är utrustade med stora objektiv eller sikten monterade i ringar högt över borrhålets centrumlinje. Mycket enkel att använda: Montera din kollimator på höjdarmen, sätt i din boresnurra i höjdblocket, och lås med tumskruven. Sätt in din snurra i borrhålet och flytta höjdaxeln uppåt eller nedåt. Justera kollimatorn så att dess rutnätssyn är nära mitten av objektivlinsen och lås kollimatorns höjd med den andra tumskruven.
1449 SEK 0 1 449,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.

Produktinformation

Leveransvikt: 0,113kg Leveranshöjd: 5mm Leveransbredd: 58mm Leveranslängd: 152mm

Produkt detaljer

Tillverkas i USA




Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

Nyhetsbrev