Flat blade gives a crisp, target-style sight picture that eliminates the distracting Òdouble-notchÓ found on factory sights. .160" high blade (same as factory) features an angled and serrated rear face that reduces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment.
SPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for installation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.
Antal betyg: 4
Från brownells.com: 4
Medelbetyg: 4,8
Great choice(2013-03-08)
This is being used on a S&W 625JM for competitive shooting. Searching the web, some people complained that the new blade had "play" and would wiggle around. Not the case for me, it's in there rock solid. In full disclosure I had a revolver gunsmith install it for minimal cost, so I can't say how difficult it was to put on. It's worth it though, the sight picture is incredible for a fraction of the cost compared to other options. The notch is a perfect .125" and appears to be slightly deeper, which is good. It also comes with the replacement parts for installation which is something other brands don't do, about a $10-15 value. It's a very functional piece that I expect will help my scores, especially on the long shots. It really should come with this from the factory. If used on a self-defense revolver there is a chance it could snag on clothing, as the edges are sharp, but for a competition gun that's a good thing.
extraordinary rear sight(2011-08-05)
Excellent product for smith & wesson k-frame 14 model target masterpiece.
Great upgrade(2012-06-06)
I didn't read the description completely and ordered a new windage screw. This kit comes with the screw/nut/detent/and spring to replace the hardware you have to break to put the new blade in.
This blade pairs great with a sdm fiber optic front. I have them on my 617-4 and my 686-5
Works great for the price. All you need(2017-08-02)
Sight is easy enough to install if you follow the directions.
It includes EVERYTHING you need, and some spares in case you lose bits. Nice touch.
Once installed, it's tighter in windage vs the stock sight. But there's a slight amount of rotational (fore aft) play, which because of the rear offset, results in slight up/down play.
Most likely it won't make a noticeable effect during target shooting, but we will test it pushing it both ways and see if it changes point of impact.
Sight picture Is VASTLY superior to stock. I found the .110 aperture perfect on an S&W 625 with 5" barrel.
For defensive use, the stock sight is stronger simply because it doesn't have a large piece hanging off the back. I suspect a strong hit will bend or break this aluminum unit. But for paper punching, even hunting, you can't beat the sight picture. It's really outstanding.
Produktnr: 078000013 BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125" Platt blad ger en skarp siktbild i målstil som eliminerar den distraherande Òdouble-notchÓ som finns på fabrikssikten. .160" högt blad (samma som fabrik) har en vinklad och tandad baksida som minskar bländning. Sträcker sig över baksidan av siktkroppen för ett renare utseende och ger en liten ökning av siktradien. Finns i två hackbredder, .110" för mål- och PPC-användning, plus .125" för IPSC, IDPA och stiftfotografering. Djupare hack ger lättare ögoninriktning.
549SEK0549,00 kr
*
Produkten kan beställas som restorder.
Funktioner:Make: Smith & WessonModell: K Frame, L Frame, N FrameSiktesfärg: SvartStil: Target
Make:
Smith & Wesson
Modell:
K Frame,L Frame,N Frame
Siktesfärg:
Svart
Stil:
Target
Leveransvikt: 0,045kgHöjd: 23mmBredd: 81mmLängd: 145mm
Produkt detaljer
Tillverkas i USA
Produktnr: 078000012 BROWNELLS COMPETITION REAR SIGHT BLADE KIT .110" Platt blad ger en skarp siktbild i målstil som eliminerar den distraherande Òdouble-notchÓ som finns på fabrikssikten. .160" högt blad (samma som fabrik) har en vinklad och tandad baksida som minskar bländning. Sträcker sig över baksidan av siktkroppen för ett renare utseende och ger en liten ökning av siktradien. Finns i två hackbredder, .110" för mål- och PPC-användning, plus .125" för IPSC, IDPA och stiftfotografering. Djupare hack ger lättare ögoninriktning.
Flat blade gives a crisp, target-style sight picture that eliminates the distracting Òdouble-notchÓ found on factory sights. .160" high blade (same as factory) features an angled and serrated rear face that reduces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment.
SPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for installation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.
Antal betyg: 4
Från brownells.com: 4
Medelbetyg: 4,8
Great choice(2013-03-08)
This is being used on a S&W 625JM for competitive shooting. Searching the web, some people complained that the new blade had "play" and would wiggle around. Not the case for me, it's in there rock solid. In full disclosure I had a revolver gunsmith install it for minimal cost, so I can't say how difficult it was to put on. It's worth it though, the sight picture is incredible for a fraction of the cost compared to other options. The notch is a perfect .125" and appears to be slightly deeper, which is good. It also comes with the replacement parts for installation which is something other brands don't do, about a $10-15 value. It's a very functional piece that I expect will help my scores, especially on the long shots. It really should come with this from the factory. If used on a self-defense revolver there is a chance it could snag on clothing, as the edges are sharp, but for a competition gun that's a good thing.
extraordinary rear sight(2011-08-05)
Excellent product for smith & wesson k-frame 14 model target masterpiece.
Great upgrade(2012-06-06)
I didn't read the description completely and ordered a new windage screw. This kit comes with the screw/nut/detent/and spring to replace the hardware you have to break to put the new blade in.
This blade pairs great with a sdm fiber optic front. I have them on my 617-4 and my 686-5
Works great for the price. All you need(2017-08-02)
Sight is easy enough to install if you follow the directions.
It includes EVERYTHING you need, and some spares in case you lose bits. Nice touch.
Once installed, it's tighter in windage vs the stock sight. But there's a slight amount of rotational (fore aft) play, which because of the rear offset, results in slight up/down play.
Most likely it won't make a noticeable effect during target shooting, but we will test it pushing it both ways and see if it changes point of impact.
Sight picture Is VASTLY superior to stock. I found the .110 aperture perfect on an S&W 625 with 5" barrel.
For defensive use, the stock sight is stronger simply because it doesn't have a large piece hanging off the back. I suspect a strong hit will bend or break this aluminum unit. But for paper punching, even hunting, you can't beat the sight picture. It's really outstanding.