Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
EAA SUPER SIGHT VORTEX VIPER/VENOM SIGHT MOUNT

841370114207 296000658
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount will not work with EAA Tanfoglio Witness.
899 899 1 SEK
Produktnr: 296000658
EGW EAA SUPER SIGHT VORTEX VIPER/VENOM SIGHT MOUNT
Tillverkarens produktnummer: 49306 841370114207 EGW rödpunktssikten är avsedda att installeras från vänster till höger (med mynningen framåt). Svansen har en progressiv avsmalning för att underlätta installationen. Ta bort det bakre sikte på ditt vapen och ersätt det med EGW-fästet för att montera din Vortex Viper/Venom, Burris FastFire eller Docter rödpunktssikte. Du kan när som helst ta bort fästet och återmontera ditt bakre sikte. Monteringsmaterial ingår. Installationsinstruktioner Ta bort det bakre sikte* Installera EGW Sight Mount i svansen Dra åt ställskruven (om tillämpligt) Placera rödpunktssiktet på EGW Sight Mount (att lägga en liten bit papper mellan rödpunktssiktet och siktfästet kommer att underlätta borttagningen och hålla Loctite borta från rödpunktssiktet.) Applicera blå Loctite på de medföljande monteringsskruvarna Dra åt monteringsskruvarna till 15in/lbs 2 knapphuvudskruvar - Tillhandahållna för Vortex Viper och Venom sikten 2 platt huvudskruvar - Tillhandahållna för Burris FastFire och Docter sikten De skruvar som medföljer detta fäste kräver en 5/64'' insexnyckel för installation. Modifiering av ditt vapen kan ogiltigförklara tillverkarens garanti. Denna produkt bör installeras och kontrolleras av en kvalificerad vapensmed. Inget ansvar uttrycks eller antyds för skador eller skador som kan uppstå till följd av felaktig installation eller användning av denna produkt. Detta fäste fungerar inte med EAA Tanfoglio Witness.
899 SEK 0 899,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.
Funktioner: Basantal: 1-Piece Färg: Svart Make: EAA Material: Aluminum Modell: Hunter, P Match Pro, P Match, Stock II Xtreme, Elite Stock II, Limite Custom Xtreme Stil: Tactical

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: EAA Material: Aluminum Modell: P Match Pro,Stock II Xtreme,Elite Stock II,Limite Custom Xtreme,Hunter,P Match Stil: Tactical Leveransvikt: 0,045kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 140mm

Produkt detaljer

Tillverkas i USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount will not work with EAA Tanfoglio Witness.
Nyhetsbrev