Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
WALTHER 22 LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115679 296000679
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Colt 1911/.22 Rail Gun (Walther .22 Slide) This mount fits the Colt Rail Gun .22lr that has the slide made by Walther.
899 899 1 SEK
Produktnr: 296000679
EGW WALTHER 22 LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Tillverkarens produktnummer: 49404 841370115679 EGW rödpunktsikten är avsedda att installeras från vänster till höger (med mynningen framåt). Svansen har en progressiv avsmalning för att underlätta installationen. Ta helt enkelt bort det bakre sikten på ditt vapen och ersätt det med EGW-fästet för att montera ditt Leupold DeltaPoint Pro, JPoint, Redfield Accelerator eller Optima rödpunktsikte. Du kan när som helst ta bort fästet och återinstallera ditt bakre sikte. Monteringstillbehör ingår. Installationsinstruktioner: Ta bort det bakre sikten* Installera EGW Siktfästet i svansen Dra åt ställskruven (om tillämpligt) Placera rödpunktsiktet på EGW Siktfästet (att placera en liten bit papper mellan rödpunktsiktet och siktfästet kommer att underlätta borttagning och hålla Loctite borta från rödpunktsiktet.) Applicera blå Loctite på de medföljande monteringsskruvarna Dra åt monteringsskruvarna till 15in/lbs Modifiering av ditt vapen kan göra tillverkarens garanti ogiltig. Denna produkt bör installeras och kontrolleras av en kvalificerad vapensmed. Inget ansvar uttrycks eller antyds för skada eller skada som kan uppstå till följd av felaktig installation eller användning av denna produkt. Detta fäste passar: Colt 1911/.22 Rail Gun (Walther .22 Slide) Detta fäste passar Colt Rail Gun .22lr som har sliden tillverkad av Walther.
899 SEK 0 899,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.
Funktioner: Basantal: 1-Piece Färg: Svart Make: Walther, Colt Material: Aluminum Modell: P22, 1911 Stil: Tactical

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: Walther,Colt Material: Aluminum Modell: P22,1911 Stil: Tactical Leveransvikt: 0,045kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 140mm

Produkt detaljer

Tillverkas i USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Colt 1911/.22 Rail Gun (Walther .22 Slide) This mount fits the Colt Rail Gun .22lr that has the slide made by Walther.
Nyhetsbrev