Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

BROWNELLS HOLE CENTER PUNCHES


3 special Center Punches with outside diameters (O.D. Mer...

080732008
Use Sights, Ribs Or Bases As Their Own Drill Jig
3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To Use: Level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. hammer. Remove base; drill and tap first hole; re-install base and check positioning. If everything is "square", re-clamp and finish other holes.
SPECS: 2-¾" (7.0cm) long. ¼" (6.3cm) dia. knurled handle. Hardened, tool steel. Set contains one of each size.
BROWNELLS
140 332 4 SEK
080732008
#8 Hole Center Punch #8 hål Center Punch
141 SEK 1 141,00 kr *

Lagervara
Funktioner: Material: Stål Stil: Hole Center

Produktinformation

Material: Stål Stil: Hole Center

Produkt detaljer

Tillverkas i USA



080732000
Hole Center Punch Set Hål Center Punch Set
332 SEK 4 332,00 kr *

Lagervara
Funktioner: Material: Stål Stil: Set, Hole Center Mängd: 3

Produktinformation

Material: Stål Stil: Hole Center,Set Mängd: 3

Produkt detaljer

Tillverkas i USA

080732006
#6 Hole Center Punch #6 hål Center Punch
140 SEK 2 140,00 kr *

Lagervara
Funktioner: Material: Stål Stil: Hole Center

Produktinformation

Material: Stål Stil: Hole Center

Produkt detaljer

Tillverkas i USA


080732010
#10 Hole Center Punch #10 hål Center Punch
140 SEK 1 140,00 kr *

Lagervara
Funktioner: Material: Stål Stil: Hole Center

Produktinformation

Material: Stål Stil: Hole Center

Produkt detaljer

Tillverkas i USA

Use Sights, Ribs Or Bases As Their Own Drill Jig
3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To Use: Level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. hammer. Remove base; drill and tap first hole; re-install base and check positioning. If everything is "square", re-clamp and finish other holes.
SPECS: 2-¾" (7.0cm) long. ¼" (6.3cm) dia. knurled handle. Hardened, tool steel. Set contains one of each size.
Nyhetsbrev