Adjustable Shafts With Interchangeable Bits To Fit & Reach Small Screws
Driver system has six, interchangeable steel shafts with 12 precision-ground bits for fast change from standard slot blade to Phillips or Torx® tip. Great for working on the many small parts and accessories found in most gun shops and hobbyist work benches. Collet lets you adjust the shaft length approximately 3" to get to those hard-to-reach places. Rotating cap minimizes friction to ease screw removal or installation, while the hanging hole in the handle can be used with a second shaft as a T-handle for extra leverage to remove stubborn screws. Handle has a soft, ergonomic, rubber outer-grip for comfort and excellent grip.
SPECS: Handle – Steel, polypropylene, and neoprene, gray and black. Shaft/Bits - Chrome-moly-vanadium steel, 4¾" (12cm) long. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0, and 1; Torx - T6, T7, T8, T9, T10, T15.
Mer...
Justerbara skaft med utbytbara bits för att passa & nå små skruvar
Detta skruvmejselset har sex utbytbara stålskaft med 12 precisionsslipade bits för snabbt byte från standard spårmejsel till Phillips eller Torx® spets. Perfekt för arbete med de många små delarna och tillbehören som finns i de flesta vapensmedsbutiker och hobbyverkstäder. Patronen låter dig justera skaftlängden med ungefär 7,5 cm för att nå de svåråtkomliga ställena. Det roterande locket minimerar friktion för att underlätta borttagning eller montering av skruvar, medan hänghålet i handtaget kan användas med ett andra skaft som ett T-handtag för extra hävstång för att ta bort envisa skruvar. Handtaget har ett mjukt, ergonomiskt, gummiyttre för komfort och utmärkt grepp.
SPECIFIKATIONER: Handtag – Stål, polypropen och neopren, grått och svart. Skaft/Bits - Krom-molybden-vanadiumstål, 12cm långa. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0 och 1; Torx - T6, T7, T8, T9, T10, T15.
Antal betyg: 1
Från brownells.com: 1
Medelbetyg: 3
Delicate (2015-05-13)
The reason I gave this set a three star rating is because of the frailness of the driver tip when using the other bits as a "T" handle for extra torque, and when I did that for a stubborn slotted screw the tip broke. I like this set for it's size to work on small intricate parts and convenience of tips.
The set however is not made for heavy use such as doing what is suggested in the description of using the other bits for a "T" handle.
I will add that the manufacture stood behind there product and did offer to replace the tip that broke.
Produktnr: 123000018 BONDHUS PRECISION SCREWDRIVER KIT Tillverkarens produktnummer: 0715750727 Detta skruvmejselset har sex utbytbara stålskaft med 12 precisionsslipade bits för snabbt byte från standard spårmejsel till Phillips eller Torx® spets. Perfekt för arbete med de många små delarna och tillbehören som finns i de flesta vapensmedsbutiker och hobbyverkstäder. Patronen låter dig justera skaftlängden med ungefär 7,5 cm för att nå de svåråtkomliga ställena. Det roterande locket minimerar friktion för att underlätta borttagning eller montering av skruvar, medan hänghålet i handtaget kan användas med ett andra skaft som ett T-handtag för extra hävstång för att ta bort envisa skruvar. Handtaget har ett mjukt, ergonomiskt, gummiyttre för komfort och utmärkt grepp.
Adjustable Shafts With Interchangeable Bits To Fit & Reach Small Screws
Driver system has six, interchangeable steel shafts with 12 precision-ground bits for fast change from standard slot blade to Phillips or Torx® tip. Great for working on the many small parts and accessories found in most gun shops and hobbyist work benches. Collet lets you adjust the shaft length approximately 3" to get to those hard-to-reach places. Rotating cap minimizes friction to ease screw removal or installation, while the hanging hole in the handle can be used with a second shaft as a T-handle for extra leverage to remove stubborn screws. Handle has a soft, ergonomic, rubber outer-grip for comfort and excellent grip.
SPECS: Handle – Steel, polypropylene, and neoprene, gray and black. Shaft/Bits - Chrome-moly-vanadium steel, 4¾" (12cm) long. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0, and 1; Torx - T6, T7, T8, T9, T10, T15.
Mer...
Justerbara skaft med utbytbara bits för att passa & nå små skruvar
Detta skruvmejselset har sex utbytbara stålskaft med 12 precisionsslipade bits för snabbt byte från standard spårmejsel till Phillips eller Torx® spets. Perfekt för arbete med de många små delarna och tillbehören som finns i de flesta vapensmedsbutiker och hobbyverkstäder. Patronen låter dig justera skaftlängden med ungefär 7,5 cm för att nå de svåråtkomliga ställena. Det roterande locket minimerar friktion för att underlätta borttagning eller montering av skruvar, medan hänghålet i handtaget kan användas med ett andra skaft som ett T-handtag för extra hävstång för att ta bort envisa skruvar. Handtaget har ett mjukt, ergonomiskt, gummiyttre för komfort och utmärkt grepp.
SPECIFIKATIONER: Handtag – Stål, polypropen och neopren, grått och svart. Skaft/Bits - Krom-molybden-vanadiumstål, 12cm långa. Bits: Standard - 5⁄64 x .016" (2.0 x 0.4mm), 9⁄64 x .141" (3.5 x 0.6mm); Phillips – 000, 00, 0 och 1; Torx - T6, T7, T8, T9, T10, T15.
Antal betyg: 1
Från brownells.com: 1
Medelbetyg: 3
Delicate (2015-05-13)
The reason I gave this set a three star rating is because of the frailness of the driver tip when using the other bits as a "T" handle for extra torque, and when I did that for a stubborn slotted screw the tip broke. I like this set for it's size to work on small intricate parts and convenience of tips.
The set however is not made for heavy use such as doing what is suggested in the description of using the other bits for a "T" handle.
I will add that the manufacture stood behind there product and did offer to replace the tip that broke.