Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

MANSON PRECISION
REM CHOKE-STYLE TOOLING

513046012
Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
3949 3949 1 SEK
Produktnr: 513046012
MANSON PRECISION 12 GAUGE REM-CHOKE REAMER
Tillverkarens produktnummer: RC12GAR En snabb och enkel metod för att installera choke-rör med hjälp av en svarv (kan göras för hand, men en svarv ger överlägsna resultat). Gängtapp och brotsch är precisionsslipade av snabbstål och använder samma utbytbara pilotbussningar. Brotschen har en förbättrad ändavlastning som ger en snabbare skärning. Pilotbussningar finns tillgängliga i diameterökningar om .001", och är 2" långa för exakt borrhålsutriktning. Fabriksinstruktioner medföljer. Observera: Läs och förstå installationskraven på sidan 62 innan du fortsätter. För bästa resultat, ta bort eventuella befintliga chokes med Angle Blade Expanding Choke Reamer innan du använder Loon Lake Choke brotsch. Klicka här för rätt installationskrav.Använder samma gängtapp och bussningar som Win-Choke, kräver en annan brotsch för att positionera gängorna på en annan plats. Pipor gängade till detta system accepterar Rem-Choke-style och Remingtons fabriksrör.
3949 SEK 0 3 949,00 kr *
Produkten kan beställas som restorder.
Funktioner: Gauge: 12 Gauge Make: Remington Modell: Universal Hagelgevär

Produktinformation

Gauge: 12 Gauge Make: Remington Modell: Universal Hagelgevär Leveransvikt: 0,318kg Leveranshöjd: 28mm Leveransbredd: 36mm Leveranslängd: 229mm

Produkt detaljer

Tillverkas i USA




Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
Nyhetsbrev