Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VORTEX VENOM

841370111978 296000649
The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
899 899 1 SEK
Produktnr: 296000649
EGW SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VENOM
Tillverkarens produktnummer: 49201 841370111978 Baksiktet på ditt vapen behöver tas bort för att kunna installera ditt rödpunktssikte på denna platta. Plattan monteras på sliden underifrån med de medföljande 4-40 skruvarna. Rödpunktssiktet installeras sedan ovanpå adapterplattan med de medföljande 6-32 skruvarna. Installationsinstruktioner Ta bort baksiktet* Installera EGW Sight Mount i kilspåret Placera rödpunktssiktet på EGW Sight Mount (att placera en liten bit papper mellan rödpunktssiktet och siktesfästet kommer att underlätta borttagning och kommer att hålla Loctite borta från rödpunktssiktet.) Applicera blå Loctite på de medföljande monteringsskruvarna Dra åt monteringsskruvarna till 15in/lbs Modifiering av ditt vapen kan ogiltigförklara tillverkarens garanti. Denna produkt bör installeras och kontrolleras av en kvalificerad vapensmed. Inget ansvar uttrycks eller antyds för skada eller skada som kan uppstå till följd av felaktig installation eller användning av denna produkt. Fungerar inte med Sig P320RX, P320 X-Five W/Romeo1 Cut eller M17 Military Surplus.
899 SEK 0 899,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.
Funktioner: Basantal: 1-Piece Färg: Svart Make: Sig Sauer Material: Aluminum Modell: P320 X-Five, M17, M18 Stil: Adapter Bases

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: Sig Sauer Material: Aluminum Modell: M18,P320 X-Five,M17 Stil: Adapter Bases Leveransvikt: 0,045kg Leveranshöjd: 25mm Leveransbredd: 51mm Leveranslängd: 140mm

Produkt detaljer

Tillverkas i USA



The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
Nyhetsbrev