Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
SIG SAUER P220 10MM HUNTER VORTEX RAZOR SIGHT MOUNT

841370117055 296000558
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
849 849 1 SEK
Produktnr: 296000558
EGW SIG SAUER P220 10MM HUNTER VORTEX RAZOR SIGHT MOUNT
Tillverkarens produktnummer: 49463 841370117055 Material: 7075 Aluminium Beläggning: Mattsvart Hårdanodisering Total längd: 1.831" Total bredd: 1.062" Monteringstillbehör: (2) 8-32 Knapphuvudskruvar, (1) 8-32 Ställskruv) Rödpunktsikte-kompatibilitet: Vortex Razor, C-More RTS & STS Ta helt enkelt bort det bakre siktet på ditt vapen och ersätt det med vårt fäste för att montera ditt Vortex Razor, C-More RTS eller STS rödpunktsikte. Inga modifieringar krävs. Du kan när som helst ta bort vårt fäste och återmontera ditt bakre sikte. Monteringstillbehör ingår. Monteringsinstruktioner Ta bort det bakre siktet* Installera EGW Siktfästet i svansen Dra åt ställskruven (om tillämpligt) Placera rödpunktsiktet på EGW Siktfästet (att lägga en liten bit papper mellan rödpunktsiktet och siktfästet kommer att underlätta borttagning och kommer att hålla Loctite borta från rödpunktsiktet.) Applicera blå Loctite på de medföljande monteringsskruvarna Dra åt monteringsskruvarna till 15in/lbs
849 SEK 1 849,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.
Funktioner: Basantal: 1-Piece Färg: Svart Make: Sig Sauer Material: Aluminum Modell: P220 Stil: Tactical

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: Sig Sauer Material: Aluminum Modell: P220 Stil: Tactical Leveransvikt: 0,034kg Leveranshöjd: 25mm Leveransbredd: 89mm Leveranslängd: 140mm

Produkt detaljer

Tillverkas i USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Nyhetsbrev