Reduced power kit with lighter than stock Power Rib mainspring plus 13, 14, & 15 lb. rebound springs for precise tuning. Lightens trigger pull and gives superior smoothness and consistency of both double & single action pull.
Mer...
Kundernas betyg påBROWNELLS PRO-SPRING KIT #SWK/L/N-201 FOR S&W K, L, N FRAME REVOLVER
Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 4,4
Another Great Brownells/Wolff Product(2010-04-19)
I installed these springs in a well-used Model 66. It had a pretty good s/a pull but the d/a was extremely heavy. Now, after installing the springs, and some judicious stoning, it's almost a different gun. Very smooth d/a pull and the s/a didn't suffer either!
Relatively easy install, Great results!(2011-10-16)
Just installed this and it took the single stage pull from a factory 4# 11oz to a smooth 3# 8oz. Double Action pull was originally way too heavy and would not register on my Lyman digital pull scale. After this kit the double action pull was around 10# 8oz. Still heavy but much better than before and much smoother. This was my first time taking down a revolver. It was a little frustrating chasing the rebound spring around the garage but got it done and back together in about 20 mins. This is a 5 or 10 minute job if I had to do it again. Can't wait to take it to the range and try it out.
Not the best for N frame(2013-10-24)
On a large frame 625 this mainspring just won't work.....not enough "punch". With an unaltered strain screw, polished internals, extended firing pin and Federal Primers the mainspring just won't consistently light them up. Great trigger feel, very smooth, but just too light. 15# Rebound spring is perfect with stock mainspring.
Easy 10-15 Minute Install(2014-02-02)
Ordered this for an N-Frame 629. Took about 10-15 minutes to install. Extremely easy to install. Why pay a Gunsmith $150 when there are plenty of online videos to learn how to install.
Very pleased(2015-10-27)
Simply transformed a 629 classic from a heavy 7.5 lb and 12 lb single/double action pull respectively to an absolutely perfect 3.5lb SA /7.5lb DA pull. Just by replacing two springs! Kit comes with the reduced power hammer spring and a choice of a 15, 14 and a 13 lb trigger rebound spring. I used the 13lb rebound spring & the hammer spring and am very pleased with the result. Very easy to install (assuming it isn't the first time you have installed a rebound spring).
Produktnr: 080665201 BROWNELLS PRO-SPRING KIT #SWK/L/N-201 FOR S&W K, L, N FRAME REVOLVER Tillverkarens produktnummer: 95205050806101876 Minskad makt kit med lättare än lager makt Rib drivkraften plus 13, 14, & 15 lb. rebound fjädrar för exakt inställning. Lättar utlösa pull och ger överlägsen jämnhet och konsekvens av båda dubbel & enda åtgärd dra.
Reduced power kit with lighter than stock Power Rib mainspring plus 13, 14, & 15 lb. rebound springs for precise tuning. Lightens trigger pull and gives superior smoothness and consistency of both double & single action pull.
Mer...
Kundernas betyg påBROWNELLS PRO-SPRING KIT #SWK/L/N-201 FOR S&W K, L, N FRAME REVOLVER
Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 4,4
Another Great Brownells/Wolff Product(2010-04-19)
I installed these springs in a well-used Model 66. It had a pretty good s/a pull but the d/a was extremely heavy. Now, after installing the springs, and some judicious stoning, it's almost a different gun. Very smooth d/a pull and the s/a didn't suffer either!
Relatively easy install, Great results!(2011-10-16)
Just installed this and it took the single stage pull from a factory 4# 11oz to a smooth 3# 8oz. Double Action pull was originally way too heavy and would not register on my Lyman digital pull scale. After this kit the double action pull was around 10# 8oz. Still heavy but much better than before and much smoother. This was my first time taking down a revolver. It was a little frustrating chasing the rebound spring around the garage but got it done and back together in about 20 mins. This is a 5 or 10 minute job if I had to do it again. Can't wait to take it to the range and try it out.
Not the best for N frame(2013-10-24)
On a large frame 625 this mainspring just won't work.....not enough "punch". With an unaltered strain screw, polished internals, extended firing pin and Federal Primers the mainspring just won't consistently light them up. Great trigger feel, very smooth, but just too light. 15# Rebound spring is perfect with stock mainspring.
Easy 10-15 Minute Install(2014-02-02)
Ordered this for an N-Frame 629. Took about 10-15 minutes to install. Extremely easy to install. Why pay a Gunsmith $150 when there are plenty of online videos to learn how to install.
Very pleased(2015-10-27)
Simply transformed a 629 classic from a heavy 7.5 lb and 12 lb single/double action pull respectively to an absolutely perfect 3.5lb SA /7.5lb DA pull. Just by replacing two springs! Kit comes with the reduced power hammer spring and a choice of a 15, 14 and a 13 lb trigger rebound spring. I used the 13lb rebound spring & the hammer spring and am very pleased with the result. Very easy to install (assuming it isn't the first time you have installed a rebound spring).