Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
WALTHER PPQ M2 LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370116850 296000543
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 507K* Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
949 949 1 SEK
Produktnr: 296000543
EGW WALTHER PPQ M2 LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Tillverkarens produktnummer: 49394 841370116850 Material: 7075 Aluminium Beläggning: Mattsvart Hårdanodisering Total längd: 1.811" Total bredd: .99" Monteringstillbehör: (2) 6-32 Knapphuvudskruvar, (2) 6-32 Platt huvudskruvar, (1) 6-32 Ställskruv Rödpunktssikteskompatibilitet: Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 507K* Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero EGWs rödpunktssikten är avsedda att installeras från vänster till höger (med mynningen framåt). Svansen har en progressiv avsmalning för att underlätta installationen. Ta bara bort bakre siktet på ditt vapen och ersätt det med vår montering för att kunna montera ditt Vortex Viper/Venom, Burris FastFire eller Docter rödpunktssikte. Inga modifieringar behövs. Du kan när som helst ta bort vår montering och sätta tillbaka ditt bakre sikte. Monteringstillbehör ingår. Installationsinstruktioner Ta bort bakre sikte* Installera EGW Siktesmonteringen i svansen Dra åt ställskruven (om tillämpligt) Placera rödpunktssiktet på EGW Siktesmonteringen (att lägga en liten bit papper mellan rödpunktssiktet och siktesmonteringen kommer att underlätta borttagning och hålla Loctite borta från rödpunktssiktet.) Applicera blå Loctite på de medföljande monteringsskruvarna Dra åt monteringsskruvarna till 15in/lbs 2 Knapphuvudskruvar - Medföljer för Vortex Viper och Venom sikten 2 Platt huvudskruvar - Medföljer för Burris FastFire och Docter sikten De skruvar som medföljer denna montering kräver en 5/64'' insexnyckel för installation.
949 SEK 0 949,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.
Funktioner: Basantal: 1-Piece Färg: Svart Make: Walther Material: Aluminum Modell: PPQ M2 Stil: Tactical

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: Walther Material: Aluminum Modell: PPQ M2 Stil: Tactical Leveransvikt: 0,227kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 127mm

Produkt detaljer

Tillverkas i USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 507K* Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Nyhetsbrev