Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
793811764642 100047158
The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
489 489 1 SEK
Produktnr: 100047158
STRIKE INDUSTRIES 17 ROUND MAGAZINE FOR GLOCK 17
Tillverkarens produktnummer: SIGMAG17 793811764642 Strike Magasin för GLOCK™ G17 (9mm) är ett högkvalitativt, stöttåligt och anpassat SI Polymer Extreme dubbelpilsmagasin med genomskinlig kropp för snabb kontroll av ammunition och en speciellt utvald fjäder för ökad tillförlitlighet. Kapaciteten för det 17+ rundor genomskinliga magasinet är designat med strategiskt placerade texturerade och icke-texturerade ytor. Texturerade där det behövs för att minska glansen från mässingen och förbättra greppet. Icke-texturerade på ena sidan för ultraklar synlighet av antalet skott och insyn i vad som pågår inuti. Magasinets kropp är inte bara genomskinlig, det finns även hörn med rundräkning för att ge alternativa vinklar för att se hur många skott som är kvar för striden. Magasinfrigöringsskär är designade på båda sidorna av SI-magasinet och är kompatibelt med höger-, vänster- och ambidextra frigöringsuppställningar som finns på fabriks GLOCK™ GEN3-GEN5 stommar. Strike Magasin för GLOCK™ G17 har en inbyggd krokplats specifikt för SI Extended Magazine Plate (EMP) stålspärrplatta för extra säkerhet när kapaciteten ökas, men basplattan som ingår har också framstående egenskaper. Sidoklipp på basplattan ger enklare grepp. Målningsbara triangelformade markörer högst upp på magasinkroppen för att hjälpa till att identifiera att magasinet är i rätt riktning vid omladdning. ID-markörer på basplattans botten gör att du kan märka dina magasin och även se till att ingen går hem med dina saker. Basplattan har också en framkant för ett ökat fotavtryck som hjälper till att stå med magasinet för att ge det lite balans. Den medföljande basplattan är en verktygsfri demonteringsdesign för snabb och enkel borttagning med ett enkelt tryck med ditt nagel. Strike Magasin för GLOCK™ G17 (9mm) är fullmatat med funktioner som ett alternativt val som bör fylla väggarna i ditt vapenskåp och vapenväska. KOMPATIBEL: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) OBS: Ej till salu till invånare i Kalifornien, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont och Washington DC på grund av lagar om 10 eller 15-rundors magasin. Köpprocessen kommer att visa att ingen fraktmetod är tillgänglig. LÄNGD 125,55 mm BREDD 28,5 mm HÖJD 41,88 mm Produktfunktioner: -Kapacitet: 17+ skott -Genomskinlig magasinkropp med strategiskt placerade texturerade och icke-texturerade ytor -Texturerade där det behövs för att minska glansen från mässingen och förbättra greppet -Icke-texturerade på en sida för ultraklar synlighet av skotträkning -Hörnskär för rundräkning ger alternativa vinklar för att se ammunitionsmängden från sidan eller baksidan av magasinkroppen -Ökad fjäderstyrka för tillförlitlighet -Ambidextra magasinsfrigöringsskär -Sidoklipp på basplattan för enklare grepp -Målningsbara triangelformade markörer högst upp på magasinkroppen för att hjälpa till att identifiera rätt riktning vid omladdning -ID-markörer på basplattans botten -Basplattans framkant för ökat fotavtryck när magasinet står -Den medföljande basplattan har en verktygsfri demonteringsdesign för snabb och enkel borttagning -Inbyggd krokplats specifikt för SI Extended Magazine Plate (EMP) stålspärrplatta för extra säkerhet när kapaciteten ökas -Högkvalitativt, stöttåligt och anpassat SI Polymer Extreme
489 SEK 0 489,00 kr *
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Funktioner: Finish: Translucent Kapacitet: 17-Round Make: Glock Material: Polymer Modell: 17 Patron: 9 mm Luger Mängd: 1

Produktinformation

Finish: Translucent Kapacitet: 17-Round Make: Glock Material: Polymer Modell: 17 Patron: 9 mm Luger Leveransvikt: 0,045kg Leveranshöjd: 32mm Leveransbredd: 102mm Leveranslängd: 191mm

Produkt detaljer

USA: s exportklassificering: 0A501.d



The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
Nyhetsbrev