Produktinformation
- Kaliber:
17 Caliber
- Leveransvikt: 0,005kg
- UPC: 667739300179
17 Caliber
Produktnr: 509000122
Tillv.nr.: BTAJ-17-00
667739300179 Tillverkad av en speciell kopparfri legering som är lika skonsam mot loppet som mässing, samtidigt som den eliminerar falska indikationer på blå kopparbeläggning på lappen. Håller lappen tätt på två ställen, vilket fördubblar den effektiva rengöringsytan. Den omvända konen självguidar in i loppet. SPECIFIKATIONER: Proprietär kopparfri legering. Ca 21?4" (5.7cm) lång. .17 kal. - 5-40 hantrådar. .22 & .30 kal. - 8-32 hantrådar.Utgått från Brownells
BORE TECH presenterar JAG, en innovativ rengöringslösning som är designad för att skydda din böra samtidigt som den effektivt tar bort skräp och fouling.
JAG är tillverkad av en speciell kopparfri legering som är lika skonsam mot böra som mässing, samtidigt som den eliminerar falska indikationer av blå kopparfouling på lappen. Den håller lappen tight på två ställen, vilket dubblerar den effektiva rengöringsytan.
Uppgradera din rengöringsupplevelse med JAG från BORE TECH och se skillnaden i din böra!
17 Caliber
Too big for .308 bore 2015-08-01
Just received. Looked forward to using. Put on a standard round patch soaked in Butch's. Would not go down barrel. Some difficulty removing.
A really nice jag 2011-07-10
A bore jag is such a simple concept, and basic item, you'd think that there isn't much thought that needs to go into its design. But Bore Tech was indeed thoughtful when they made their version of the lowly jag.
First off, it doesn't give a copper indication. Great. Works as advertised.
Second, the alloy used won't scratch the bore, at least from what I've seen.
But they take this point a step further, even though they don't say it... They gave it a highly polished finish. Finish is just as, if not more, important than the material used. A rough finish (like what I've seen on some of my brass jags) is more likely to scratch. Good job!
I'm guessing that this finish is -not- a plating, as it's described as "Machined from a special copper-free alloy..." but I didn't want to take a file to the jag to verify this. (Platings can chip in the long term, making sharp ridges that can scratch.)
The reverse taper that they mention is so when you pull the jag back (after pushing the patch) it doesn't grab, and potentially nick, the muzzle crown. They also extended this treatment near the base of the threads. It works.
One last point, so to speak, is the point. It is sharp enough to easily pierce the cotton patches, but they also made it nice and long so as to hold the patch in place while you maneuver the cleaning rod back into place with a fresh patch. They didn't mention this feature, but it certainly helps.
Yes, it's pricier than a lot of other jags, but in this case it's worth every penny. I anticipate a lifetime of use.
Vi stötte på ett fel när vi laddade innehållet. Vänligen uppdatera sidan för att fortsätta. Om problemet kvarstår, kontakta vår kundtjänst.