Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
050806106482 080810000
Long Wearing "Cobalt" Stones For Shaping Hardened Slides
We kept looking until we finally found these premium quality, smooth cutting stones to give you the ultimate combination of hardness, cutting speed and finish for shaping the ejection port roll-over notch on those tough, 1911 Auto slides. Start with the B51 stone for either the short or long style notch, then finish up with the B42 to bring the long style notch to full depth. Cobalt impregnated aluminum oxide stones cut fast but will not gouge or tear the metal. You get a smooth, ready-to-finish surface that can be polished or bead-blasted. Stones can be reground and reshaped so they last through job after job. Hardened steel shanks are nickel-plated for long life and stay concentric even after repeated use.
SPECS: Cobalt impregnated aluminum oxide, 120 grit. Includes (2) B51, (2) B42 stones and instructions. 1/8" (3mm) dia. shank.
349 349 1 SEK
Produktnr: 080810000
BROWNELLS EJECTION PORT GRINDING STONE KIT 050806106482 Vi letade tills vi äntligen hittade dessa premiumkvalitetsstenar som skär mjukt för att ge dig den ultimata kombinationen av hårdhet, skärhastighet och finish för att forma överrullningsnotchen vid utkastarporten på de tuffa 1911 Auto-slidarna. Börja med B51-stenen för antingen den korta eller långa stilen på notchen, och avsluta sedan med B42 för att föra den långa stilen till fullt djup. Koboltimpregnerade aluminiumoxidstenar skär snabbt men kommer inte att skava eller riva upp metallen. Du får en slät, färdigställningsbar yta som kan poleras eller sandblästras. Stenarna kan slipas om och formas om så att de håller för jobb efter jobb. Hårdade stålskaft är förnicklade för lång livslängd och förblir koncentriska även efter upprepad användning.
349 SEK 4 349,00 kr *
4 på lager
Funktioner: Make: 1911 Modell: Government, Commander, Officers

Produktinformation

Make: 1911 Modell: Commander,Government,Officers Leveransvikt: 0,023kg Leveranshöjd: 5mm Leveransbredd: 91mm Leveranslängd: 150mm

Produkt detaljer

Tillverkas i USA



Long Wearing "Cobalt" Stones For Shaping Hardened Slides
We kept looking until we finally found these premium quality, smooth cutting stones to give you the ultimate combination of hardness, cutting speed and finish for shaping the ejection port roll-over notch on those tough, 1911 Auto slides. Start with the B51 stone for either the short or long style notch, then finish up with the B42 to bring the long style notch to full depth. Cobalt impregnated aluminum oxide stones cut fast but will not gouge or tear the metal. You get a smooth, ready-to-finish surface that can be polished or bead-blasted. Stones can be reground and reshaped so they last through job after job. Hardened steel shanks are nickel-plated for long life and stay concentric even after repeated use.
SPECS: Cobalt impregnated aluminum oxide, 120 grit. Includes (2) B51, (2) B42 stones and instructions. 1/8" (3mm) dia. shank.
Nyhetsbrev