The M2-B has a Picatinny style rail positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. (with vent holes, as found mostly on Chinese AKs) Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing. Made in U.S.A.
SPECS: Scout Mount – 6061-T6 hard anodized aluminum, 4140 steel mounting clamps, matte black. 6.7" (17cm) long. Fits 7.62x39 caliber rifles that have original gas tubes with side gas port holes as found mostly on Chinese AKs.
AK SCOUT MOUNT MODEL M2-B – Den lägsta optikmonteringen för AK-47
AK SCOUT MOUNT MODEL M2-B från ULTIMAK är den perfekta lösningen för dem som söker en låg profil för sin AK-47. Med en Picatinny-stil skena som är placerad väl under järnsiktets axel, erbjuder denna monteringslösning en oslagbar optikinstallation.
Produktbeskrivning
M2-B har en låg monterad tubär sikte som gör att du kan använda din optik utan en comb riser och fortfarande behålla ditt vanliga grepp. Systemet möjliggör co-witnessing, vilket innebär att du kan använda dina järnsikten direkt genom en 1x-sikte som ett reservsiktessystem när det används med ett tubärt reflexsikte.
Denne robusta monteringslösning ersätter den ursprungliga stålgasröret och övre handskyddet, vilket innebär att den lägger till mindre än ett uns till vikten av ditt gevär, vilket gör den till den lättaste optikmonteringen i världen. Den framåtriktade positioneringen av optiken ger snabbare, enklare och mer naturlig målsökning samtidigt som du behåller ditt fulla synfält. Flera målinriktningar eller rörliga mål med båda ögonen öppna blir en andra natur.
Monteringen behöver sällan tas bort för att rengöra geväret, så du behöver inte oroa dig för att tappa nollpunkten. Eftersom monteringen är klämd på pipan och inte fastklämd mellan gasblocket och sikteblocket som det ursprungliga gasröret, har flera UltiMAK-användare rapporterat en förbättring av sina AK:s inneboende noggrannhet.
UltiMAK Optics Mount har konstruerats för att vara kompatibel med ett brett utbud av AK-gevärsvariationer. Om du har en 7.62 x 39 kaliber AK med standardvikt pipan och ett standardlängd, avtagbart gasrör (ungefär sju tum, eller 17,7 centimeter totalt gasrörslängd) bör monteringen passa bra. Vi har ännu inte funnit ett gevär av ovanstående beskrivning som vår monteringslösning inte passar, förutsatt att geväret är monterat rimligt rakt. Vissa AKs har radikalt feljusterade gasblock i jämförelse med bakre siktblocket. I sällsynta fall kan detta orsaka problem vid installation av UltiMAK Monteringen.
SPECIFIKATIONER
- Scout Mount – 6061-T6 hårdanodiserad aluminium, 4140 stålmonteringsklämmor, matt svart.
- Längd: 6.7" (17 cm).
- Passar 7.62x39 kaliber gevär som har ursprungliga gasrör med sidogashål som mestadels finns på kinesiska AKs.
Ingen gunsmithing krävs. Tillverkad i USA.