Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

BRAVO COMPANY
AR-15 BCMGUNFIGHTER CHARGING HANDLE GEN 2 BLACK AMBIDEXTROUS

812526021236 100027147
Runs as Hard as You Do - Easy To Operate With EITHER Hand
The BCMGunfighter Gen 2 Ambidextrous Charging Handle preserves the enhanced performance of their original "tactical" AR-15 charging handle - with a multiple improvements that make it even easier to operate, more reliable, and yes, unique-looking. The updated Gunfighter continues to provide a more generous grasping surface than a mil-spec handle, coupled with a smaller profile, while it eliminates the risk of breaking the latch roll pin when you yank aggressively on the handle. BCM redesigned the Gen 2 handle’s geometry to take the stress off the latch pin and redirect it into the much stronger T-handle itself. You get a straighter pull - with either hand - that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle and risk breaking it. Beveled edges on the handle provide an easy to grasp, snag free profile, while a raised top shield prevents gas from blowing back into the shooter’s face when running the gun with a silencer. Available in Mod 3X3 and Mod 4X4 configurations (described below) Fits all mil-spec direct impingement AR-15 upper receivers Not compatible with adjustable gas keyed bolt / carrier groups Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength Bravo Company offers the BCM Gunfighter Gen 2 ambidextrous charging handle in two configurations: Mod 3X3 with a large latch and Mod 4X4 with a medium sized latch.  
1599 1599 2 SEK
New
Produktnr: 100027147
BRAVO COMPANY BCMGUNFIGHTER AMBIDEXTROUS CHARGING HANDLE MOD 3X3 LARGE
Tillverkarens produktnummer: BCMGFHMOD3X3556 812526021236 BCMGunfighter Gen 2 Ambidextrous Charging Handle bibehåller den förbättrade prestandan från deras ursprungliga "taktiska" AR-15 laddningshandtag - med flera förbättringar som gör det ännu enklare att använda, mer pålitligt och ja, unikt utseende. Den uppdaterade Gunfighter fortsätter att erbjuda en mer generös greppyta än ett mil-spec handtag, tillsammans med en mindre profil, samtidigt som den eliminerar risken för att bryta låsspetsens rullstift när du rycker aggressivt i handtaget. BCM har omformat geometrin hos Gen 2-handtaget för att ta bort stressen från låsstiftet och omdirigera den till det mycket starkare T-handtaget självt. Du får ett rakare drag - med vilken hand som helst - som håller energin närmare gevärets mittlinje, så att du inte vrider handtaget och riskerar att bryta det. Fasade kanter på handtaget ger en lätt att greppa, hakefri profil, medan en upphöjd toppsköld förhindrar att gas blåser tillbaka i skyttens ansikte när vapnet körs med en ljuddämpare. Finns i Mod 3X3 och Mod 4X4 konfigurationer (beskrivna nedan) Passar alla mil-spec direktimpingement AR-15 övre mottagare Inte kompatibel med justerbara gasnycklade bult- / bärargrupper Robust smidd 7075 T6 aluminiumkonstruktion Mil-A-8625F, Typ III, Klass 2 hårdanodiserad för förbättrad ytstyrka Bravo Company erbjuder BCM Gunfighter Gen 2 ambidextrous charging handle i två konfigurationer: Mod 3X3 med ett stort lås och Mod 4X4 med ett medelstort lås.
1599 SEK 5 1 599,00 kr *
5 på lager

Produktinformation

Leveransvikt: 0,077kg Leveranshöjd: 25mm Leveransbredd: 133mm Leveranslängd: 235mm

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.x



New
Produktnr: 100027146
BRAVO COMPANY BCMGUNFIGHTER AMBIDEXTROUS CHARGING HANDLE MOD 4X4 MEDIUM
Tillverkarens produktnummer: BCMGFHMOD4X4556 812526021243 BCMGunfighter Gen 2 Ambidextrous Charging Handle bibehåller den förbättrade prestandan från deras ursprungliga "taktiska" AR-15 laddningshandtag - med flera förbättringar som gör det ännu enklare att använda, mer pålitligt och ja, unikt utseende. Den uppdaterade Gunfighter fortsätter att erbjuda en mer generös greppyta än ett mil-spec handtag, tillsammans med en mindre profil, samtidigt som den eliminerar risken för att bryta låsspetsens rullstift när du rycker aggressivt i handtaget. BCM har omformat geometrin hos Gen 2-handtaget för att ta bort stressen från låsstiftet och omdirigera den till det mycket starkare T-handtaget självt. Du får ett rakare drag - med vilken hand som helst - som håller energin närmare gevärets mittlinje, så att du inte vrider handtaget och riskerar att bryta det. Fasade kanter på handtaget ger en lätt att greppa, hakefri profil, medan en upphöjd toppsköld förhindrar att gas blåser tillbaka i skyttens ansikte när vapnet körs med en ljuddämpare. Finns i Mod 3X3 och Mod 4X4 konfigurationer (beskrivna nedan) Passar alla mil-spec direktimpingement AR-15 övre mottagare Inte kompatibel med justerbara gasnycklade bult- / bärargrupper Robust smidd 7075 T6 aluminiumkonstruktion Mil-A-8625F, Typ III, Klass 2 hårdanodiserad för förbättrad ytstyrka Bravo Company erbjuder BCM Gunfighter Gen 2 ambidextrous charging handle i två konfigurationer: Mod 3X3 med ett stort lås och Mod 4X4 med ett medelstort lås.
1599 SEK 0 1 599,00 kr *
Tyvärr kan produkten inte beställas.
Runs as Hard as You Do - Easy To Operate With EITHER Hand
The BCMGunfighter Gen 2 Ambidextrous Charging Handle preserves the enhanced performance of their original "tactical" AR-15 charging handle - with a multiple improvements that make it even easier to operate, more reliable, and yes, unique-looking. The updated Gunfighter continues to provide a more generous grasping surface than a mil-spec handle, coupled with a smaller profile, while it eliminates the risk of breaking the latch roll pin when you yank aggressively on the handle. BCM redesigned the Gen 2 handle’s geometry to take the stress off the latch pin and redirect it into the much stronger T-handle itself. You get a straighter pull - with either hand - that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle and risk breaking it. Beveled edges on the handle provide an easy to grasp, snag free profile, while a raised top shield prevents gas from blowing back into the shooter’s face when running the gun with a silencer. Available in Mod 3X3 and Mod 4X4 configurations (described below) Fits all mil-spec direct impingement AR-15 upper receivers Not compatible with adjustable gas keyed bolt / carrier groups Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength Bravo Company offers the BCM Gunfighter Gen 2 ambidextrous charging handle in two configurations: Mod 3X3 with a large latch and Mod 4X4 with a medium sized latch.  
Nyhetsbrev