Varukorgen är tom.

Varukorg

ZRO DELTA
AR-15 LOWER PARTS KIT

100500154

The Enhanced Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.

Mer...

Det förbättrade Lower Parts Kit är fosfatbelagt och inkluderar alla grundläggande delar för LPK minus Trigger Guard, Grip och Fire Control Assemblies.

Mer...

Kundernas betyg påZRO DELTA AR-15 LOWER PARTS BUILDER KIT

Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 2,9

Great quality at a reasonable price! (2017-03-31)

Great finish and fit. Not covered in sloppy grease but lightly coated in preservative. Everything fit great! The front pivot pin fit very snugly and took out all the upper/lower slop in two sets I tried it in. I've spent money on National Match and oversized pins and this one worked just as well. I'll buy again for sure.

I do not recommend. (2017-05-12)

Kit seemed fine looking it over initially. Once installed the safety selector switch does not smoothly rotate from safe to fire. It feels gritty and takes more force than it should. My other issue is the take down pins. Same issue, they do not smoothly push out and take more force than normal. It's like the detent is binding on the surface of the selector and take down pins. The rest of the kit is fine and I'll make do with the take down pins. The safety selector, I will have to replace for something else. It just feels terrible.

Works fine (2017-08-25)

Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs.

Will buy another for future builds

Kind of an odd LPK... (2017-09-02)

A few non-standard parts here- for one, the takedown detents are black (not gold) and asymmetrical in shape. The blunt end needs to face the pin, because the pointy end will lock your pin. FCG pins are .155 or greater, and would not pass through a Noveske lower (NBD, I have a pile of standard pins on my bench). Selector detent, also too pointy to interface with the selector (or recess too deep?) maybe they will break in as they grind, but I junked those too. Lastly, the BHO roll pin is a spiral vs. a C (again, no biggie, just strange). I would avoid this product.

Get what you pay for (2017-12-12)

I bought a few of these. They are nothing special and priced accordingly. I had a bad mag dis connector and they quickly sent me a replacement, kit comes with a very plastic dis connect button. A nice cheap way to finish off your project and get it through the paces, then swap out for better parts later if you see need to. They will probably stay in a while and work fine.

Poor quality overall (2017-12-31)

Same issues as the other reviewers - should've known better than to buy this.

The detents for the takedown grab the takedown pins far more than they should. Took a file to them to round them off a bit to alleviate this.

The safety included had a horrible feel to it - very gritty and more resistance than should be present. Swapped it for another safety lever that I had and the problem went away .

Also worth noting, this kit does not include a grip screw. The picture accurately depicts that, I just overlooked it and could see others overlooking the same. Luckily I had a few extra on hand.

For the money...this kit can't be beat! (2018-01-19)

I have purchased and used these kits in the past and recently purchased two more. After reading the reviews, I thought I would give my findings. Maybe because I am a gunsmith and an experienced builder, I have not had a single problem! I will be purchasing more.

Waste of Money (2018-02-06)

Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.

Terrible... (2018-08-08)

Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.

Nice workmanship, Iâm sure mil specs (2018-09-02)

The materials that they used look durable/strong,

Iâm sure itâs a mil specs

Läs 10 fler betyg på brownells.com

549 549 1 SEK

Produktnr: 100500154
ZRO DELTA AR-15 LOWER PARTS BUILDER KIT
Tillverkarens produktnummer: 703500081520 Det förbättrade Lower Parts Kit är fosfatbelagt och inkluderar alla grundläggande delar för LPK minus Trigger Guard, Grip och Fire Control Assemblies.

549 SEK 22 549,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Make: AR-15

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Produktinformation

Make: AR-15 Leveransvikt: 0,07kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 114mm

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.x

The Enhanced Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.

Mer...

Det förbättrade Lower Parts Kit är fosfatbelagt och inkluderar alla grundläggande delar för LPK minus Trigger Guard, Grip och Fire Control Assemblies.

Mer...

Kundernas betyg påZRO DELTA AR-15 LOWER PARTS BUILDER KIT

Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 2,9

Great quality at a reasonable price! (2017-03-31)

I do not recommend. (2017-05-12)

Works fine (2017-08-25)

Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs.

Will buy another for future builds

Kind of an odd LPK... (2017-09-02)

Get what you pay for (2017-12-12)

Poor quality overall (2017-12-31)

For the money...this kit can't be beat! (2018-01-19)

Waste of Money (2018-02-06)

Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.

Terrible... (2018-08-08)

Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.

Nice workmanship, Iâm sure mil specs (2018-09-02)

The materials that they used look durable/strong,

Iâm sure itâs a mil specs

Läs 10 fler betyg på brownells.com

Kunder har även köpt

FORSTER PRODUCTS, INC. 0.410" TRIMMER PILOT
CASE TRIMMER PILOT

FORSTER PRODUCTS, INC.

Lagervara

139,00 kr * 139,00 kr - 159,00 kr*

Hylssvarv Styrtappar

BROWNELLS M4 BUFFER SPRING (CS)
AR-15/M16 BUFFER SPRINGS

BROWNELLS

Lagervara

129,00 kr * 129,00 kr - 329,00 kr*

BROWNELLS AR-15/M16 SMALL PARTS KIT
AR-15/M16 SMALL PARTS KIT

BROWNELLS

Order kan placeras

429,00 kr *

VLTOR WEAPON SYSTEMS A5 SPRING AND BUFFER KIT
AR-15/M16 A5 SPRING KIT

VLTOR WEAPON SYSTEMS

Order kan placeras

1 249,00 kr *

VLTOR WEAPON SYSTEMS A5 RECEIVER EXTENSION TUBE
AR-15/M16 A5 MIL-SPEC BUFFER TUBE

VLTOR WEAPON SYSTEMS

Order kan placeras

949,00 kr *

Buffer Tuber

Logga in

Har du glömt lösenordet?
Registrering

SOCIAL MEDIA

Facebook

HEMSIDA

PRODUKTKATEGORI

BESTÄLLNING

KUNDSERVICE

Välkommen!

Välkommen till brownells.se, den ledande leverantören av skyttetillbehör, unika vapendelar, vapenrelaterade produkter, laddutrustningar, laddverktyg, kulor & hylsor, optik & vapensmide samt andra produkter för att underhålla, reparera och uppgradera dina vapen! Du kommer att hitta över 90.000 produkter till bra priser, stor lagerhållning samt brett utbud!

Vårt erbjudande:

Gillar du att skjuta, är vapensmed eller jägare, är detta platsen för dig! Skyttar, professionella vapensmeder, hobbyanvändare, militär/polis och pistolanvändare vänder sig till brownells.se för att hitta vapendelar och produkter av hög kvalitet.

cf-web-badges-e-ltgray