Varukorgen är tom.

Varukorg

0247-41085

Prenumerera på nyhetsbrev

HOGUE
AR-15 OVERMOLDED™ FOREND

743108150146 408150120

Comfortable, Non-Slip Grip Surface

Machined aluminum free-float forends provides an exceptionally positive, non-slip gripping surface for the support hand to help ensure maximum weapon control. Easy-to-install, two-piece free-float design eliminates handguard stress on the barrel that can compromise accuracy. Use with rifle’s factory gas tube; if changing barrel length, purchase replacement gas tube of appropriate length. Rifle- and carbine-length models available in cobblestone-texture Overmolded™ rubber grasping surface.

SPECS: Forend – Aluminum, hardcoat anodized, matte black, with synthetic rubber covering on Overmolded models. Rifle - 12¼” (31.1cm) long, 2” (5cm) diameter. Fits AR-15/M16 and clones with rifle-length gas system. Carbine – 7-1⁄8” (17.8cm) long, 2” diameter. Fits AR-15/M16/M4 and clones with carbine-length gas system.

Mer...

Bekväm, Halkfri Greppyta

Bearbetade aluminium free-float förlängare ger en exceptionellt positiv, halkfri greppyta för stödhanden vilket hjälper till att säkerställa maximal vapenkontroll. Enkel att installera, tvådelad free-float design eliminerar handskyddsstress på pipan som kan försämra precisionen. Använd med vapnets fabriksgasrör; vid byte av pipans längd, köp ett ersättningsgasrör av lämplig längd. Modeller för rifle- och carbine-längd tillgängliga med kobblestens-texturerad Overmolded™ gummigreppyta.

SPECS: Förlängd – Aluminium, hårdanodiserad, matt svart, med syntetiskt gummibeläggning på Overmolded-modeller. Rifle - 12¼” (31.1cm) lång, 2” (5cm) diameter. Passar AR-15/M16 och kloner med rifle-length gas system. Karbin – 7-1⁄8” (17.8cm) lång, 2” diameter. Passar AR-15/M16/M4 och kloner med carbine-length gas system.

Mer...

Kundernas betyg påHOGUE CARBINE FOREND, OVERMOLDED

Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 2,9

Lucky if you get one that fits (2016-02-20)

Typically, you would think Hogue makes some solid, comfortable products. Well, this one is quite solid. So solid it won't fit. If you look at the instructions, it'll say you should note the alignment of the gas tube port on the upper receiver with one of the many available gas tube holes around the barrel nut when hand tightened, then tighten it to the next hole, which is anywhere from 1/2 of a notch to a notch and a half. Well, I was lucky enough to score myself on the halfway mark. I lubed up the sucker quite copiously. I then hand tightened it to line up perfect with one of the holes on the barrel nut. Of course, that's not going to fly (or will it just fly off?), so I took out the supplied wrench and noticed it won't fit. It's not the right size. The 2" end of the wrench is too small. The 2 1/8" side is too big. OK, great. Fortunately I have a strap wrench handy. I'll take that and tighten it. Well... that didn't work either. I got halfway there, muscled it, and now I feel Hogue owes me a new strap wrench because I tore mine up. Despite my best efforts, the gas tube won't go in because the hole is completely misaligned. How Hogue expects you to tighten it a whole notch, let alone one and a half, is beyond me.

Bottom line: this is a piece of junk. You'll notice in another review of a similar Hogue hand guard that the reviewer suffered a similar issue. Clearly I'm not the only one. I typically don't write scathing reviews, but I feel like I have to put out a PSA on this for humankind. So here goes: If you are a decent human being, do not buy this product.

Would not buy again (2012-09-14)

The pins on my barrel wrench were not long enough to engage into the barrel nut. The directions gave instruction on how to modify your gas tube-meanwhile the description block on the website said that modification of the tube was not required. I didn't want to modify my gas tube. The grip handle didn't come with the package, evidently that is sold separately.

Great forend with Hogue 3-gun extention (2012-09-29)

This is a super short forend for carbine Ar15 rifles. If you use Hogue's "3gun" extention with this forend, you get a perfect 15" length forend on a 18-20" Ar rifle, and have the rubber grip out where you need it. I have this setup on 2 of my guns and they look and work fantastic.

Not worth the trouble or money (2013-10-09)

This has got to be the worst engineered product I have bought in quite a while. I understand that you have to pay sixty plus dollars for an aluminum tube, but then they tell you that you will have to bend your gas tube an advise you get a gunsmith to do it for ( $65-$100 dollars an hour). Lastly the barrel nut needs a strap wrench or as they advise get an old belt and a pair of vice grips to put in on. I guest just get it tight is good enough, not to worry about torquing it down.

Horrible (2017-12-29)

Just finished installing this total piece of junk on a buddy's gun. The wrench they give you is a joke and you have to buy a special gas tube or mess with bending the existing one. I have install many many handguards and this is the WORST one I have ever used.

Easy to install free float forend (2010-01-26)

Installed this forend on my Armalite 16" midlength gas system and was really glad I did. Clean lines, full free float, hogue pebble grip surface. The only down side is that you have to drill and tap for a bipod stud.

Hogue hits home run! (2015-02-04)

I did my first install of a hogue free float tube today and was very happy with it. I will say that reading the included instructions prior to starting was very helpful as they were very clear and tell you what you need to know before you make a mistake. The included wrench is less complicated than it sounds. Very nice product, well made, very sturdy. I will be using this product on my next AR-15 build, parts should be here soon. Both rifles are for target/varmint shooting.

Läs 7 fler betyg på brownells.com

1549 1599 2 SEK

Produktnr: 408150120
HOGUE CARBINE FOREND, OVERMOLDED
Tillverkarens produktnummer: 15014 743108150146 Bearbetade aluminium free-float förlängare ger en exceptionellt positiv, halkfri greppyta för stödhanden vilket hjälper till att säkerställa maximal vapenkontroll. Enkel att installera, tvådelad free-float design eliminerar handskyddsstress på pipan som kan försämra precisionen. Använd med vapnets fabriksgasrör; vid byte av pipans längd, köp ett ersättningsgasrör av lämplig längd. Modeller för rifle- och carbine-längd tillgängliga med kobblestens-texturerad Overmolded™ gummigreppyta.

1599 SEK 1 1 599,00 kr *

Levernastid ca. 14-21 dagar.
1 st. i centrallagret.

Funktioner: Färg: Svart Längd: 7 Make: AR-15 Material: Aluminum Stil: Carbine, Free Float

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Produktinformation

Färg: Svart Längd: 7 Make: AR-15 Material: Aluminum Stil: Carbine,Free Float Leveransvikt: 0,295kg Leveranshöjd: 36mm Leveransbredd: 152mm Leveranslängd: 358mm

Produkt detaljer

USA: s exportklassificering: 0A501.y.1

Produktnr: 408150020
HOGUE RIFLE FOREND, OVERMOLDED
Tillverkarens produktnummer: 15004 743108150047 Bearbetade aluminium free-float förlängare ger en exceptionellt positiv, halkfri greppyta för stödhanden vilket hjälper till att säkerställa maximal vapenkontroll. Enkel att installera, tvådelad free-float design eliminerar handskyddsstress på pipan som kan försämra precisionen. Använd med vapnets fabriksgasrör; vid byte av pipans längd, köp ett ersättningsgasrör av lämplig längd. Modeller för rifle- och carbine-längd tillgängliga med kobblestens-texturerad Overmolded™ gummigreppyta.

1549 SEK 0 1 549,00 kr *

Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.

Funktioner: Färg: Svart Längd: 12 Make: AR-15 Material: Aluminum Stil: Free Float

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Comfortable, Non-Slip Grip Surface

Mer...

Bekväm, Halkfri Greppyta

Mer...

Kundernas betyg påHOGUE CARBINE FOREND, OVERMOLDED

Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 2,9

Lucky if you get one that fits (2016-02-20)

Would not buy again (2012-09-14)

Great forend with Hogue 3-gun extention (2012-09-29)

Not worth the trouble or money (2013-10-09)

Horrible (2017-12-29)

Easy to install free float forend (2010-01-26)

Hogue hits home run! (2015-02-04)

Läs 7 fler betyg på brownells.com

Kunder har även köpt

NORDIC COMPONENTS RUGER 10/22 CHASSIS ALUMINUM BLK
RUGER 10/22 CHASSIS

NORDIC COMPONENTS

Slut i lager

Gevärskolvar

MAGPUL AR-15 PMAG GEN M2 MOE MAG 223/5.56 30RD POLYMER BLACK
AR-15 30RD PMAG GEN M2 MOE MAGAZINE 223/5.56

MAGPUL

Lagervara

289,00 kr * 289,00 kr - 19 499,00 kr*

Magasin | Magazines

4,8

HOGUE PISTOL GRIP RUBBER BLACK
AR-15 PISTOL GRIP

HOGUE

Lagervara

469,00 kr *

Pistolgrepp

4,8

DOUBLE STAR MIL-SPEC BUFFER TUBE ASSEMBLY
AR-15/M16 BUFFER TUBES

DOUBLE STAR

Order kan placeras

599,00 kr *

Buffer Tuber

4,3

BROWNELLS M4 BUFFER SPRING (CS)
AR-15/M16 BUFFER SPRINGS

BROWNELLS

Lagervara

129,00 kr * 129,00 kr - 329,00 kr*

Logga in

Har du glömt lösenordet?
Registrering

SOCIAL MEDIA

Facebook

HEMSIDA

PRODUKTKATEGORI

BESTÄLLNING

KUNDSERVICE

Välkommen!

Välkommen till brownells.se, den ledande leverantören av skyttetillbehör, unika vapendelar, vapenrelaterade produkter, laddutrustningar, laddverktyg, kulor & hylsor, optik & vapensmide samt andra produkter för att underhålla, reparera och uppgradera dina vapen! Du kommer att hitta över 90.000 produkter till bra priser, stor lagerhållning samt brett utbud!

Vårt erbjudande:

Gillar du att skjuta, är vapensmed eller jägare, är detta platsen för dig! Skyttar, professionella vapensmeder, hobbyanvändare, militär/polis och pistolanvändare vänder sig till brownells.se för att hitta vapendelar och produkter av hög kvalitet.

cf-web-badges-e-ltgray