Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

J P ENTERPRISES AR-15 6.5 GRENDEL / 6MM ARC COMPLETE BOLT ASSEMBLY ENHANCED


AR15 6.5 Grendel / 6mm ARC Complete Bolt Assembly

The J P Enterprises Complete Bolt Assembly (Enhanced) for 6.5 Grendel / 6mm ARC is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. Made from SAE 9310 steel the JPE Enhanced Bolt Assembly for 6.5 Grendel / 6mm ARC has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. Mer...

Produktnr: 452000166 812872020778 452000166
Lasts Up To 10X Longer
The J P Enterprises Complete Bolt Assembly (Enhanced) for 6.5 Grendel / 6mm ARC is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. Made from SAE 9310 steel the JPE Enhanced Bolt Assembly for 6.5 Grendel / 6mm ARC has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. J P Enterprises has meticulously machined radiuses on all 90-degree corners on the locking lugs to help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling of your favorite firearm.

SPECS: SAE 9310 nickel-chromium-molybdenum steel, black nitrate. Fully assembled with extractor, gas rings, ejector, pins, and springs installed. Bolt Shroud Depth: .140" nominal.

J P ENTERPRISES
2971 2971 1 SEK
452000166
AR15 6.5 Grendel / 6mm ARC Complete Bolt Assembly
Tillverkarens produktnummer: JPBCEB65G 812872020778 Komplett bult församling är precisionsbearbetade från en extremt stark stål legering till sist upp till 10 gånger längre än en standard kolstål bult, minimera risken för bult misslyckande under ett kritiskt engagemang. SAE 9310 stål har en tuff, segjärn inre kärna högresistenta betona spräckning, med en hård yttre yta som motstår irriterande och slitage, att säkerställa en livslängd på upp till 60.000 rundor. Detta är samma stål används i transmission växlar av formel 1 racerbilar, så det är perfekt för hög effekt, hög värme program som ihållande full-auto eld. Noggrant ut maskinbearbetade radier på alla 90 graders hörn på låsning klackarna hjälp fördela inverkan kraft jämnt och ytterligare minska risken för förtida slitage och sprickbildning. Fullt stöd extractor ansikte och exakta extractor engagemang ytterligare säkerställa smidig, tillförlitlig cykling. Bultar finns individuellt eller i en avslutad grupp, som omfattar bult, tändstiftet, cam pin och slagstiftet behålla pin. Tillgängliga kaliber 6,5 Grendel.
2971 SEK 0 2 971,00 kr *
Beställs via epost eller telefon
Produkten kan för tillfället inte beställas som restorder.
Funktioner: Finish: Black DLC Make: AR-15 Patron: 6.5 Grendel

Köpinformation

  • Tillstånd Krävs - Handlartillstånd eller Inköpstillstånd (Handlartillstånd eller Inköpstillstånd från polisen måste postas till oss. Licenspliktiga vapendelar skickas inte förrän vi har erhållit tillståndet.)
  • Beställs via epost eller telefon

Produktinformation

Finish: Black DLC Make: AR-15 Patron: 6.5 Grendel

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: I(g)



Lasts Up To 10X Longer
The J P Enterprises Complete Bolt Assembly (Enhanced) for 6.5 Grendel / 6mm ARC is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. Made from SAE 9310 steel the JPE Enhanced Bolt Assembly for 6.5 Grendel / 6mm ARC has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. J P Enterprises has meticulously machined radiuses on all 90-degree corners on the locking lugs to help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling of your favorite firearm.

SPECS: SAE 9310 nickel-chromium-molybdenum steel, black nitrate. Fully assembled with extractor, gas rings, ejector, pins, and springs installed. Bolt Shroud Depth: .140" nominal.

Nyhetsbrev