Produktinformation
- Färg:
Svart
- Stil:
Rifle Sling Adapter
- Leveransvikt: 0,023kg
- Leveranshöjd: 15mm
- Leveransbredd: 89mm
- Leveranslängd: 155mm
Den lågt profilerade adaptern ger en AR-15/M16 med A2-stil på kolven bekvämligheten och mångsidigheten av en single-point clip-on sling/mash-hook/H&K sling monteringsfäste.
Adaptern är precisionsbearbetad från 4140 kolstål för extra styrka, med extra metall på fästeöglan, så oavsett hur hårt du drar eller vrider i selen, kommer denna adapter inte att gå sönder.
Ingen permanent modifiering av geväret krävs: ta helt enkelt bort kolven, skjut adaptern över mottagarens förlängningstube och installera kolven igen med den medföljande distansen och den förlängda kolvskruven.
Svart
Rifle Sling Adapter
installation 2018-06-28
the kit assumes you are altering a carbine buffer tube. Instructions refer to the extra spacer that one would need when installing an A2 fixed stock on a carbine rifle(16" buffer tube is shorter).... I installed this on standard 20 inch rifle buffer tube. Unfortunately, the screw that was included in the kit was too long for the rifle buffer tube and will only work if you're modifying a carbine model with a carbine buffer tube and needed a spacer to install A2 stock... fortunately, I was able to use the existing screw and reinstall the stock, but would like one a little shorter than the one provided( or an extra screw for that option) to accommodate standard rifle buffer tube. I might have to cut the screw provided order to get maximum threads... even though only adds up 5/16 of an inch... would like to have that extra threads in stock that holds it all together.
Great POA 2016-09-15
The adapter looks very well made and sturdy, just the same as the other reviews state. The only thing I would change about it is not with the adapter but with the hardware. I installed mine on an olympic arms lower and the included spacer on mine kept rattling around some. I had to make a shim out of a 1/2" flat washer. It took some time but I was able to get it to just the right tolerances that it would hold both the spacer and the adapter tight on the butt stock. With the slight variances in tolerance from rifle to rifle, that is to be expected and I do not fault Brownells at all. Maybe they could include a couple other spacers that differ by a few hundredths of an inch in length. I would have paid $5 more just for that convenience. Otherwise, excellent product and highly recommend!
Vi stötte på ett fel när vi laddade innehållet. Vänligen uppdatera sidan för att fortsätta. Om problemet kvarstår, kontakta vår kundtjänst.