Produktinformation
- Leveransvikt: 0,603kg
- Leveranshöjd: 95mm
- Leveransbredd: 178mm
- Leveranslängd: 203mm
- UPC: 734307908119
Produktnr: 100018937
Tillv.nr.: 90811
734307908119 Automatisk hylsaktiverad trummätare för krut. Mäter noggrant och automatiskt upp krut i din favoritpatron. Två oändligt justerbara trummor ingår. Dessa Quick Change-trummor kommer noggrant och pålitligt att släppa laddningar från 1 till 80 grain krut. Hylsaktiverad Quick Change-tratt med av/på-ventil. Trummor för pistol och gevär ingår.Levernastid ca. 14-21 dagar.
Presenterar AUTO-DRUM POWDER MEASURE från LEE PRECISION, en automatisk mätare som aktiveras av hylsan. Denna innovativa produkt gör det möjligt att noggrant och automatiskt dosera pulver till dina favoritpatroner.
Med AUTO-DRUM POWDER MEASURE kan du vara säker på att du får en exakt och konsekvent laddning varje gång, vilket förbättrar din skytteupplevelse.
Very good 2020-10-25
More accurate than both my Dillon and Lyman 55 powder measure. Easy to adjust amount of powder in small steps. Operates smoothly. Will buy another.
My favorite powder dispenser 2017-11-14
First off, I can't believe there is only 1 review on this product at the time of my writing. I've used this dispenser for the last year or so and every time I love it. The dispenser is just like the Lee Perfect Powder Measure (which I actually like) but with automation. The instructions have a method of setting the charge with a pre-weighed charge you want. Tweak the adjustment thimble as necessary with the provided key tool. The operation is so smooth compared to the Auto-Disk which sounds like a screen door opening due to the return spring on it. I own 3 of those but just one Auto-Drum since it sits on my .223 Rem turret setup. I did remove the safety disconnect that requires you to reset it after each drop, there are instructions with the product and YouTube videos on how to do it. For some it may by OK, but for my use on the Lee Turret press, it is redundant. Like I said, smooth but it is accurate and consistent. I weigh various samples during my .223 loading process and all of them come either on the dot or within +/- a tenth. That has been my experience. As the other reviewer stated, you can get multiple rifle and pistol drums for an inexpensive amount and write on them (they have a flat spot designed for labeling) so you can switch them out if you want to. I probably won't use that as mine is dedicated to one cartridge. One slight caveat, for .223 Rem it is right at the border of not working the drum rotation completely due to the length of the case in the long Lee rifle charging die. I did buy the short rifle charging die and that made a world of difference! Also, only set it up enough to just operate the drum and no more, otherwise you may shove the neck into the charging die and slightly crimp it which will make bullet-starting/seating a bit difficult. When done loading, the body area holds a relatively large amount of powder. You'll want to empty it, on my turret I can just shut off the hopper and remove, then lift the turret out of the press and dump it into the powder container, and after that I may run a spent case just to make sure it's all out. I hope this info helps.
Vi stötte på ett fel när vi laddade innehållet. Vänligen uppdatera sidan för att fortsätta. Om problemet kvarstår, kontakta vår kundtjänst.