Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

WILCOX INDUSTRIES
COMP-M MOUNT

100004257
Strong, Lightweight, Tactical Mount For Secure Attachment Of Comp Series Sights
Compact tactical mount securely positions an Aimpoint red dot optic the correct height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/M3/ML3 series, 3XMAG magnifier, and other optics with 30mm tube that require single-ring mounting. Skeletonized construction provides full support without the weight of excess metal for an exceptionally strong, solid, yet lightweight mount. Four, steel, hex-head cap screws anchor the top ring half to the mount to ensure full contact with sight body to prevent slippage. Rail Grabber clamping system secures the mount to receiver and maintains sight alignment even under the battering of sustained rapid fire. Unique, captive cross-bolt is divided lengthwise; one side provides a slop-free fit in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half turn exposes the side that snugs into the narrower Weaver-type slot. An oversized thumb nut with deep grasping grooves lets the operator tighten the mount with hand pressure only; coin slot in the head lets you apply additional tightening force with a U.S. nickel or quarter.

SPECS: Aluminum, hardcoat anodized, matte black finish. Height measured from top of rail to bottom of scope tube: 1.120” (2.84cm). 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 3XMAG magnifier, and other optics that require a single 30mm ring mount.

3249 3249 1 SEK
Produktnr: 100004257
WILCOX INDUSTRIES AIMPOINT COMP-M MOUNT
Tillverkarens produktnummer: 13600G01 Kompakt taktiskt fäste som säkert positionerar ett Aimpoint rödpunktsikte i rätt höjd över en flattop-mottagarskena. Passar Aimpoint CompC3/M2/ML2/M3/ML3-serien, 3XMAG förstoringsglas, och andra optik med 30mm rör som kräver montering med en ring. Skelett-konstruktionen ger fullt stöd utan vikten av överskottsmetall för ett exceptionellt starkt, solidt, men ändå lätt fäste. Fyra stål, sexkantiga skruvar för toppringen ankra fästet till fästet för att säkerställa full kontakt med sikteskroppen för att förhindra glidning. Rail Grabber klämmsystem säkrar fästet till mottagaren och bibehåller siktesjustering även under det hårda trycket från snabb eldgivning. En unik, fångad tvärbult är delad på längden; ena sidan ger en spel-fri passform i en MIL-STD 1913 Picatinny-skena, medan en halv vridning av bulten exponerar sidan som passar i det smalare Weaver-typ spåret. En överdimensionerad tummut med djupa greppspår låter operatören dra åt fästet med bara handtryck; myntspår i huvudet låter dig tillämpa ytterligare åtdragningskraft med en amerikansk nickel eller kvartal.
3249 SEK 0 3 249,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.
Funktioner: Finish: Mattsvart Höjd: 1.120'' Make: Universal Gevär Stil: Picatinny

Produktinformation

Finish: Mattsvart Höjd: 1.120'' Make: Universal Gevär Stil: Picatinny Leveransvikt: 0,068kg Leveranshöjd: 43mm Leveransbredd: 51mm Leveranslängd: 104mm

Produkt detaljer

Tillverkas i USA



Strong, Lightweight, Tactical Mount For Secure Attachment Of Comp Series Sights
Compact tactical mount securely positions an Aimpoint red dot optic the correct height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/M3/ML3 series, 3XMAG magnifier, and other optics with 30mm tube that require single-ring mounting. Skeletonized construction provides full support without the weight of excess metal for an exceptionally strong, solid, yet lightweight mount. Four, steel, hex-head cap screws anchor the top ring half to the mount to ensure full contact with sight body to prevent slippage. Rail Grabber clamping system secures the mount to receiver and maintains sight alignment even under the battering of sustained rapid fire. Unique, captive cross-bolt is divided lengthwise; one side provides a slop-free fit in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half turn exposes the side that snugs into the narrower Weaver-type slot. An oversized thumb nut with deep grasping grooves lets the operator tighten the mount with hand pressure only; coin slot in the head lets you apply additional tightening force with a U.S. nickel or quarter.

SPECS: Aluminum, hardcoat anodized, matte black finish. Height measured from top of rail to bottom of scope tube: 1.120” (2.84cm). 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 3XMAG magnifier, and other optics that require a single 30mm ring mount.

Nyhetsbrev