Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
BROWNING T-BOLT PICATINNY SCOPE MOUNT

841370112821 296000621
This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Their one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. They machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). They recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, they recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
749 749 1 SEK
Produktnr: 296000621
EGW BROWNING T-BOLT 1-PIECE PICATINNY BASE 0 MOA
Tillverkarens produktnummer: 43330 841370112821 Detta fäste levereras standard med en fasning på båda sidor vilket gör den ambidexter. EGW rekommenderar att mäta hålavståndet i ditt vapens mottagare för att bekräfta att det överensstämmer med de mått de har publicerat. Picatinny tvärspår löper längs hela skenans längd, vilket ger skytten flexibilitet när det gäller montering av kikarsiktesringar och andra tillbehör. Kanalen i mitten minskar fästets totala massa. Dessutom kommer det i många fall inte att blockera användningen av fabrikens järnsikten. Deras enhetliga kikarsiktesfästen är det självklara valet för jägare och taktiska skyttar. De bearbetar dessa i sin verkstad med hjälp av ett av deras bearbetningscenter. Efter bearbetning blir fästena tumblande, sandblästrade och anodiserade enligt Typ II för långvarig hållbarhet. Installation: EGW rekommenderar 20 tum lbs vridmoment och en droppe blå loctite (loctite säljs separat). De rekommenderar: 0 MOA - om du skjuter 0-500 yards 20 MOA - om du skjuter 500-1000 yards När du nollställer ditt gevär med ett 20 MOA fäste, rekommenderar de att nollställa på 200 yards. Hela fästet och tillbehören (från monteringsskruvar och nyckel ner till förpackningen) är tillverkade i USA.
749 SEK 4 749,00 kr *
Levernastid ca. 14-21 dagar.
4 st. i centrallagret.
Funktioner: Basantal: 1-Piece Elevation: 0 MOA Färg: Svart Make: Browning Material: Aluminum Modell: T-Bolt Stil: Picatinny Rail

Produktinformation

Antal Baser: 1-Piece Elevation: 0 MOA Färg: Svart Make: Browning Material: Aluminum Modell: T-Bolt Stil: Picatinny Rail Leveransvikt: 0,091kg Leveranshöjd: 25mm Leveransbredd: 102mm Leveranslängd: 229mm

Produkt detaljer

Tillverkas i USA



This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Their one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. They machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). They recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, they recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Nyhetsbrev