The KIDD .22LR Classic Receiver is an aftermarket receiver. It is a slip-fit design with industry standard dimensions. The Classic is designed with the easy access rear cleaning hole and a proprietary interchangeable low scope base with varying minute of angle (MOA) available. Zero MOA is great for 50 yards and under 20 MOA is helpful for 150 yards and over. It is designed to drop into a stock inletted for the 10/22 without any modification. This receiver is milled out from 6061 T6 aluminum and anodized either black or clear. Recommend using a KIDD trigger with a KIDD receiver. KIDD has provided the option to build this receiver with receiver pins, bolt buffer, or rear tang if desired. The receiver is machined to utilize their threaded receiver pins. The KIDD upgraded bolt buffer will cushion the felt recoil of the bolt. The optional rear tang will increase your stability of the rifle but require some custom inletting to your stock. (See rear tang installation instruction below) We also have the additional option of a second scope base due to the interchangeable nature of this base you may want to purchase two. So, for instance, if you were going to change from shooting 25 yards to 150 yards and your scope needed some help with that adjustment, you could switch out the base. Both the scope base and rear tangs have mating designs to the receiver so that the rifles have great rigidity as well as some customization aspects. FEATURES: 10/22 style aftermarket slip fit receiver Durable anodized finish Billet aluminum Rear access cleaning hole Optional v-block, rear tang, take down screw, bolt buffer, and pins Specialized interchangeable scope base Receiver comes standard with Zero scope base installed You must be 21 or older to purchase this product as this is an FFL Product. Rear tang installation instructions: Tool: 1/2"" bit After measuring part give (+) .030 on the Z axis and (+) .005 on the X and Y.
KIDD .22LR Classic Receiver – En perfekt uppgradering för ditt 10/22-system!
KIDD .22LR Classic Receiver är en eftermarknadsreceiver som är designad för att passa perfekt i din 10/22 utan några modifieringar. Den har en slip-fit design med branschstandardmått och är tillverkad av 6061 T6 aluminium, anodiserad i antingen svart eller klar finish.
Produktegenskaper:
- 10/22 stil eftermarknads slip-fit receiver
- Hållbar anodiserad finish
- Billet aluminium
- Bakre rengöringshål för enkel åtkomst
- Valfria tillbehör:
- V-block
- Bakre tang
- Skruv för nedtagning
- Boltbuffert
- Receiver-pinnar
- Särskild utbytbar scope base
- Receiver levereras standard med Zero scope base installerad
Den utbytbara scope basen gör det möjligt att enkelt byta mellan olika inställningar för avstånd, vilket gör den idealisk för både kort- och långdistansskytte. Med en Zero MOA bas kan du enkelt sikta in dig på 50 yards, medan 20 MOA är användbart för avstånd över 150 yards.
Observera att du måste vara 21 år eller äldre för att köpa denna produkt, eftersom det är en FFL-produkt.
Installationsanvisningar för bakre tang:
Verktyg: 1/2" borr
Efter att ha mätt delen, lägg till (+) .030 på Z-axeln och (+) .005 på X- och Y-axeln.
Hjälp och kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning