The TCS Sling is a 2-1 point convertible sling designed to function on CAR-15 / M4 variants and a wide variety of other long guns. It can be converted from 2 point to 1 point sling formats in seconds and back again just as easily. It features three (3) 3/8" wide shock cords sleeved at the rear end of the sling that allow you to sling up a little tighter, yet easily cross shoulder transition. The shock cords also give you the benefit of shock absorption during aggressive movement. The TCS Sling also features a side release buckle assembly that is intended to stay attached to the weapon at all times. The female portion of the side release buckle is permanently attached to the sling itself. With the male portion of the side release buckle attached to the weapon, and the female portion attached to the sling, the sling remains wrapped around the operator's body when the release buckle is disengaged. This is the key feature of this design. If it becomes necessary to unhook the weapon from your body, such as when firing from an unconventional shooting position outside of the capabilities of the sling or something as simple, yet hazardous, as mounting/dismounting a vehicle, there isn't 3 feet of webbing trailing from the weapon. This allows the operator a much greater degree of versatility and safety. Note: You must have some form of side mounted front sling loop, hook or swivel and a receiver mounted QD swivel socket for this sling to mount to. Wide, comfortable 1.5" wide tubular webbing across the shoulder area Lightweight, but highly durable 1” Mil-W-43668 adjuster strap Quiet ladder lock front adjuster with 1” wide webbing handle and elastic retainer for storage when in the 1 point mode Steel rectangular conversion link Three (3) 1/4" wide shock cords sleeved at the rear end of the sling Steel HK type front attachment hook QD swivel rear attachment Emergency Release Buckle (ERB) The CCS Sling is a 2-1 point convertible sling designed to function on CAR-15 / M4 variants and a wide variety of other long guns. It can be converted from 2 point to 1 point sling formats in seconds and back again just as easily. Note: You must have some form of side mounted front sling loop, hook or swivel and a receiver mounted rear sling loop, hook or swivel for this sling to mount to. 1.25” webbing across the shoulder area Lightweight, but highly durable 1” Mil-W-43668 adjuster strap Quiet ladder lock front adjuster with 1” wide webbing handle and elastic retainer for storage when in the 1 point mode Steel spring hook rear attachment device with elastic silencer Steel HK type front attachment hook Emergency Release Buckle (ERB)
Upptäck den mångsidiga TCS Sling för ditt skyttebehov!
TCS Sling är en 2-1 punkts konvertibel selen som är designad för att fungera på CAR-15 / M4 varianter och en mängd andra långvapen. Den kan enkelt konverteras mellan 2 punkts och 1 punkts slingformat på bara några sekunder.
Funktioner:
- Shock cords: Tre (3) 3/8" breda shock cords är placerade i bakänden av selen, vilket gör det möjligt att spänna selen lite tightare, samtidigt som du enkelt kan göra en överkorsad axelövergång.
- Stötdämpning: Shock cords erbjuder fördelar med stötdämpning vid aggressiv rörelse.
- Säkerhetsdesign: Selen har en sidfrisläppningsspänne som är avsett att alltid vara kopplat till vapnet. Den kvinnliga delen av spännet är permanent fäst vid selen.
- Flexibilitet: När den manliga delen av spännet är kopplad till vapnet och den kvinnliga delen till selen, förblir selen runt operatörens kropp även när spännet frigörs.
- Praktisk: Om det blir nödvändigt att lossna vapnet från kroppen, till exempel vid skytte från en okonventionell position eller vid på- och avstigning av ett fordon, finns det inte tre fot webbing som hänger från vapnet, vilket ger operatören större mångsidighet och säkerhet.
Specifikationer:
- Bred, bekväm 1.5" bred tubular webbing över axelområdet.
- Lättviktig men mycket hållbar 1” Mil-W-43668 justerrem.
- Tyst stege lås frontjusterare med 1” bred webbinghandtag och elastisk hållare för förvaring i 1 punktsläge.
- Stål rektangulär konverteringslänk.
- Tre (3) 1/4" breda shock cords i bakänden av selen.
- Stål HK typ frontfäste.
- QD svängbar bakfäste.
- Nödfallsfrigöringsspänne (ERB).
Observera: Du måste ha någon form av sidmonterad front sling loop, krok eller sväng och en mottagar monterad QD sväng socket för att montera denna sling.