Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
CZ 75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115914 296000677
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
899 899 1 SEK
Produktnr: 296000677
EGW CZ75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Tillverkarens produktnummer: 49402 841370115914 Ta enkelt bort det bakre siktet på ditt vapen och ersätt det med EGW-monteringen för att kunna montera din Leupold DeltaPoint Pro, JPoint, Redfield Accelerator eller Optima rödpunktsikte. Du kan när som helst ta bort monteringen och återmontera ditt bakre sikte. Monteringshårdvara ingår. Installationsinstruktioner Ta bort det bakre sikte* Installera EGW Sight Mount i svansen Dra åt ställskruven (om tillämplig) Placera rödpunktsiktet på EGW Sight Mount (att lägga en liten bit papper mellan rödpunktsiktet och siktmonteringen kommer att underlätta borttagningen och hålla Loctite borta från rödpunktsiktet.) Applicera blå Loctite på de medföljande monteringsskruvarna Dra åt monteringsskruvarna till 15in/lbs Modifiering av ditt vapen kan göra tillverkarens garanti ogiltig. Denna produkt bör installeras och kontrolleras av en kvalificerad vapensmed. Inget ansvar uttrycks eller underförstås för skada eller skada som kan uppstå på grund av felaktig installation eller användning av denna produkt. Denna montering passar: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (kan kräva anpassning på grund av variation i svansdimensioner) CZ P-09 (kan kräva anpassning på grund av variation i svansdimensioner) CZ PCR (det kommer att vara en glipa under framsidan av adapterplattan) Tristar P120
899 SEK 0 899,00 kr *
Meddela om tillgänglighet
Tyvärr kan produkten inte beställas.
Funktioner: Basantal: 1-Piece Färg: Svart Make: CZ Material: Aluminum Modell: 75, 85, P-07, P-09, 97B, P-01, SP-01 Shadow, PCR, SP-01, SP-01 Phantom, 97D Stil: Tactical

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: CZ Material: Aluminum Modell: P-09,P-07,SP-01 Phantom,SP-01 Shadow,97D,P-01,85,PCR,SP-01,75,97B Stil: Tactical Leveransvikt: 0,045kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 140mm

Produkt detaljer

Tillverkas i USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
Nyhetsbrev