The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being perfectly level with the scope body. Simply attach your mounted scope to the Dead Level, level the device with the precision thumbscrews to center up the bulls-eye level, then just level the reticle with a predetermined level line or plumb bob. Aluminum Mil. Spec. Now features an Anodized Hard Coat Type III in a crimson and black finish. Instructions included. FOR USE WITH MIL STD 1913 PICATINNY COMPLIANT RINGS AND MOUNTS
Mer...
Dead Level nivellerar ditt riktmedel i förhållande till jorden och eliminerar alla felmarginaler som kan uppstå om riktmedlet inte är perfekt nivellerat med kikarsiktets kropp. Fäst helt enkelt ditt monterade kikarsikte till Dead Level, nivellera enheten med de precisionsinställda tumskruvarna för att centrumställa bubbelnivån, och nivellera sedan riktmedlet med en förutbestämd nivålinje eller lod. Tillverkat av aluminium enligt militära specifikationer. Nu med en anodiserad hård ytbehandling av typ III i en rödsvart finish. Instruktioner ingår. FÖR ANVÄNDNING MED MIL STD 1913 PICATINNY KOMPATIBLA RINGAR OCH FÄSTEN
Mer...
Kundernas betyg påBADGER ORDNANCE DEAD LEVEL SCOPE LEVELING DEVICE
Antal betyg: 2
Från brownells.com: 2
Medelbetyg: 4,5
Excellent Tool(2013-11-04)
This tool is excellent at getting your scope perfectly level and tightening the scope in the rings. When shooting long range competitions it is important to dial in elevation from 200 to 1000 yards and not have windage drift. It is a bit expensive, but well worth it. Very solidly built. Will last a lifetime.
Good but not perfect(2014-10-25)
Pros:
Once I attached a set of rings to the rail, mounted the
scope a little loosely in the rings & levelled the base, it
was a quick job to level the reticle by looking through the
scope at a reference line from a self leveling laser level
line projected on the wall, rotating the scope until the
reticle matched the laser line, tightening down the rings
and rechecking the alignment.
Cons:
I found the integral bubble level hard to get centered so I
had to use another level to get the base level.
Because of the length of the rail, low rings don't work
well with it unless risers are added. A shorter rail would
Produktnr: 093000051 BADGER ORDNANCE DEAD LEVEL SCOPE LEVELING DEVICE Tillverkarens produktnummer: 20050 Dead Level nivellerar ditt riktmedel i förhållande till jorden och eliminerar alla felmarginaler som kan uppstå om riktmedlet inte är perfekt nivellerat med kikarsiktets kropp. Fäst helt enkelt ditt monterade kikarsikte till Dead Level, nivellera enheten med de precisionsinställda tumskruvarna för att centrumställa bubbelnivån, och nivellera sedan riktmedlet med en förutbestämd nivålinje eller lod. Tillverkat av aluminium enligt militära specifikationer. Nu med en anodiserad hård ytbehandling av typ III i en rödsvart finish. Instruktioner ingår. FÖR ANVÄNDNING MED MIL STD 1913 PICATINNY KOMPATIBLA RINGAR OCH FÄSTEN
3399SEK33 399,00 kr
*
Levernastid ca. 14-21 dagar. 3 st. i centrallagret.
The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being perfectly level with the scope body. Simply attach your mounted scope to the Dead Level, level the device with the precision thumbscrews to center up the bulls-eye level, then just level the reticle with a predetermined level line or plumb bob. Aluminum Mil. Spec. Now features an Anodized Hard Coat Type III in a crimson and black finish. Instructions included. FOR USE WITH MIL STD 1913 PICATINNY COMPLIANT RINGS AND MOUNTS
Mer...
Dead Level nivellerar ditt riktmedel i förhållande till jorden och eliminerar alla felmarginaler som kan uppstå om riktmedlet inte är perfekt nivellerat med kikarsiktets kropp. Fäst helt enkelt ditt monterade kikarsikte till Dead Level, nivellera enheten med de precisionsinställda tumskruvarna för att centrumställa bubbelnivån, och nivellera sedan riktmedlet med en förutbestämd nivålinje eller lod. Tillverkat av aluminium enligt militära specifikationer. Nu med en anodiserad hård ytbehandling av typ III i en rödsvart finish. Instruktioner ingår. FÖR ANVÄNDNING MED MIL STD 1913 PICATINNY KOMPATIBLA RINGAR OCH FÄSTEN
Mer...
Kundernas betyg påBADGER ORDNANCE DEAD LEVEL SCOPE LEVELING DEVICE
Antal betyg: 2
Från brownells.com: 2
Medelbetyg: 4,5
Excellent Tool(2013-11-04)
This tool is excellent at getting your scope perfectly level and tightening the scope in the rings. When shooting long range competitions it is important to dial in elevation from 200 to 1000 yards and not have windage drift. It is a bit expensive, but well worth it. Very solidly built. Will last a lifetime.
Good but not perfect(2014-10-25)
Pros:
Once I attached a set of rings to the rail, mounted the
scope a little loosely in the rings & levelled the base, it
was a quick job to level the reticle by looking through the
scope at a reference line from a self leveling laser level
line projected on the wall, rotating the scope until the
reticle matched the laser line, tightening down the rings
and rechecking the alignment.
Cons:
I found the integral bubble level hard to get centered so I
had to use another level to get the base level.
Because of the length of the rail, low rings don't work
well with it unless risers are added. A shorter rail would