Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

EGW
H&K USP LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370114245 296000681
EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: USP Compact (rear sight cut depth is .200"" instead of .160"") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
899 899 1 SEK
Produktnr: 296000681
EGW H&K USP LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Tillverkarens produktnummer: 49406 841370114245 EGW rödpunktsikten är avsedda att installeras från vänster till höger (med mynningen framåt). Svansen har en progressiv konning för att underlätta installationen. Ta bort det bakre siktet på ditt vapen och ersätt det med EGW-fästet för att kunna montera ditt Leupold DeltaPoint Pro, JPoint, Redfield Accelerator eller Optima rödpunktssikte. Inga modifieringar krävs. Du kan när som helst ta bort fästet och återmontera ditt bakre sikte. Monteringstillbehör ingår. Installationsinstruktioner Ta bort det bakre siktet* Installera EGW Sight Mount i svansen Dra åt ställskruven (om tillämpligt) Placera rödpunktssiktet på EGW Sight Mount (att lägga en liten bit papper mellan rödpunktssiktet och siktesfästet kommer att underlätta borttagning och hålla Loctite borta från rödpunktssiktet.) Applicera blå Loctite på de medföljande monteringsskruvarna Dra åt monteringsskruvarna till 15in/lbs Modifiering av ditt vapen kan göra vapentillverkarens garanti ogiltig. Denna produkt bör installeras och kontrolleras av en kvalificerad vapensmed. Inget ansvar uttrycks eller antyds för skador eller skador som kan uppstå till följd av felaktig installation eller användning av denna produkt. Detta fäste passar inte: USP Compact (bakre siktskårens djup är .200" istället för .160") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
899 SEK 0 899,00 kr *
Meddela om tillgänglighet
Ej tillgänglig.
Funktioner: Basantal: 1-Piece Färg: Svart Make: Heckler & Koch Material: Aluminum Modell: USP 40, USP 9, USP 45, USP Tactical 9mm, USP Tactical 45 Stil: Tactical

Produktinformation

Antal Baser: 1-Piece Färg: Svart Make: Heckler & Koch Material: Aluminum Modell: USP Tactical 9mm,USP Tactical 45,USP 9,USP 40,USP 45 Stil: Tactical Leveransvikt: 0,045kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 140mm

Produkt detaljer

Tillverkas i USA



EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: USP Compact (rear sight cut depth is .200"" instead of .160"") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
Nyhetsbrev