This mount is NOT a drop in part and will require fitting. EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. EGW products should be installed and checked by a qualified and competent gunsmith. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail after checking for fit Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Firearms with oversized Novak cut dovetails. This mount is made .007"" larger than a standard Novak cut and will require fitting.
Öka din precision med OVERSIZED NOVAK 0.007" VORTEX VIPER/VENOM SIGHT MOUNT!
Denna montag är INTE en drop-in-del och kommer att kräva anpassning. EGW rödpunktsikts är avsedda att installeras från vänster till höger (med mynningen framåt). Dovetailen har en progressiv taper för att underlätta installationen.
Följ dessa steg för installation:
- Ta bort bakre sikt*
- Installera EGW Sight Mount i dovetailen efter att ha kontrollerat passformen
- Dra åt setskruven (om tillämpligt)
- Placera rödpunktsiktet på EGW Sight Mount (att lägga en liten bit papper mellan rödpunktsiktet och siktsfästet gör det enklare att ta bort och håller Loctite borta från rödpunktsiktet.)
- Tillämpa blå Loctite på de medföljande monteringsskruvarna
- Dra åt monteringsskruvarna till 15in/lbs
Inkluderade skruvar:
- 2 Button Head Cap Screws - Tillhandahålls för Vortex Viper och Venom Sights
- 2 Flat Head Cap Screws - Tillhandahålls för Burris FastFire och Docter Sights
Skruvarna som ingår med denna montag kräver en 5/64'' insexnyckel för installation. Modifiering av ditt vapen kan ogiltigförklara tillverkarens garanti.
Denna produkt bör installeras och kontrolleras av en kvalificerad vapensmed.
Ingen ansvarighet uttrycks eller underförstås för skador eller skador som kan uppstå från felaktig installation eller användning av denna produkt.
Denna montag passar:
- Vapen med oversized Novak cut dovetails. Denna montag är tillverkad .007" större än en standard Novak cut och kommer att kräva anpassning.