EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features Forward Controls Design think many will find useful. EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close. Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. Forward Controls Design incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense. EPC is compatible with TDP spec upper receivers. Weight: 0.30oz. Material: 7075 Construction and coating: billet, type III anodized. Proudly designed and made in the USA. NOTE: Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles. Proudly designed and made in the USA.
Kraftfull och funktionell ejection port cover
EPC (Ejection Port Cover) är baserad på TDP-dimensioner, med genomtänkta detaljer från Forward Control. Tillverkad av 7075 aluminium med billetmaskinbearbetning och hård yta av typ III anodisering, innehåller den funktioner som Forward Controls Design tror många kommer att finna användbara.
Produktegenskaper:
- Två "flikar" som flankerar urtaget för port cover-fjädern, vilket gör det möjligt för EPC att vila på den övre delen i en större vinkel när den är i nedåt/öppen position.
- Ger mer utrymme mellan port cover och nedre mottagare, vilket underlättar för användarens finger att komma under port cover när den ska svängas upp/stängas.
- En grund cirkulär fördjupning på sidan av EPC ger taktil feedback till användarens finger när han stänger EPC.
- En platt yta ger inget till användaren för att särskilja en yta från en annan och ger ingen dragkraft. En grund cirkulär fördjupning på vänster sida av EPC gör båda delarna.
- Exteriören av EPC behandlas som en kontrollyta, där en platt yta sällan är meningsfull.
EPC är kompatibel med TDP-specifikationens övre mottagare.
Specifikationer:
- Vikt: 0.30 oz
- Material: 7075
- Konstruktion och beläggning: billet, typ III anodiserad
Stolt designad och tillverkad i USA.
OBS: Initial stängning och öppning av EPC kan vara styv, detta är normalt och kommer att bli lättare med 2 eller 3 stängnings-/öppningscykler.
Stolt designad och tillverkad i USA.