CN5F (Castle Nut, A5, Forward Controls) is an extended version of CNF Forward Controls Design (FCD) have been making since 2018. CN5F is designed specifically for the superb Vltor A5 system, CN5F is 0.1" longer, and is as long as FCD can make a castle nut while ensuring backward compatibility, and the stock's ability to fully collapse on Vltor's RE-A5 and FCD's RE5F. Note: not all stocks will fully collapse on A5 compatible REs. For more information on the differences between RE-A5, RE5F and RE10/A5SR, please follow this link: https://www.forwardcontrolsdesign.com/Vltor-RE-A5-vs-RE10-A5SR_ep_78-1.html CN5F aims to cover as much of the threaded area of a receiver extension (RE) as possible. It could be made longer, but it will run into backward compatibility issues with some REs' timing when installing the castle nut and end plate on the RE. CN5F is made specifically for the Vltor A5 system, and it will allow even the longest carbine stocks to fully collapse on RE-A5 and FCD's RE5F. While CN5F will also work on standard TDP spec length RE, the additional length of the castle nut will prevent the carbine stock to fully collapse. Other than its length, CN5F shares common features with its smaller brother, CNF. The TDP spec castle nut is a simple and robust fastener that is almost perfect for the job it's tasked to perform. Over the years, FCD have consistently come up with two minor gripes, first is its staking notches seem rather shallow and short, second is FCD don't enjoy using the castle nut's wrench notches as serrations (FCD's fingers invariably find their way to these sharp cutouts) to rotate it towards to the end plate while installing it. CN5F (Castle Nut, Forward Controls) is based on the TDP spec castle nut, with couple of changes: 0.1" longer. Staking notches angle changed from 45 to 30 degrees, this results in longer (25% longer than TDP spec) and deeper notches than found on TDP castle nuts. Number of staking notches increased from 3 to 4, spaced equally on the CNF. The castle nut is to be staked in two places, FCD are not advocating staking in more than two places, CNF's 4 staking notches mean that, at all times, 3 will be visible and available for staking, it simply gives the user more staking location options. Coarse serrations on the wrench side of the nut, a single use feature to make it easier while rotating the CNF towards the end plate. It is FCD’s opinion that a castle nut should be staked per TM, CNF's and CN5F's longer and deeper notch reinforces the belief, that once installed and staked, it will not loosen without the user's deliberate action. Forward Controls Design like the idea of quick detach, but some things on an AR are meant to stay put, and considerable effort was made to ensure that by the original designers. CNF and CN5F are a continuation and evolution in that direction. CN5F is billet machined in 4140 PH steel, and black nitrided (Cerakoted FDE, OD green, and burnt bronze also available). As with everything Forward Controls Design produces, it is proudly made in the USA. Weight: 0.51oz Material: 4140 PH Made in USA
Kraftfull och pålitlig A5 CASTLE NUT från Forward Controls Design
CN5F (Castle Nut, A5, Forward Controls) är en förlängd version av CNF som Forward Controls Design (FCD) har tillverkat sedan 2018. CN5F är specifikt utformad för det fantastiska Vltor A5-systemet och är 0,1 tum längre. Detta är den längsta castle nut som FCD kan tillverka samtidigt som bakåtkompatibilitet säkerställs, samt att kolven kan fällas helt på Vltor's RE-A5 och FCD's RE5F. Observera: inte alla kolvar kommer att fällas helt på A5-kompatibla REs.
För mer information om skillnaderna mellan RE-A5, RE5F och RE10/A5SR, följ denna länk: Skillnader mellan RE-A5, RE5F och RE10/A5SR.
CN5F syftar till att täcka så mycket av den gängade ytan på en mottagare (RE) som möjligt. Det skulle kunna göras längre, men det skulle orsaka problem med bakåtkompatibilitet med vissa REs' timing när castle nut och ändplatta installeras på RE. CN5F är specifikt tillverkad för Vltor A5-systemet och gör att även de längsta karbin-kolvarna kan fällas helt på RE-A5 och FCD's RE5F. Även om CN5F också fungerar på standard TDP-spec längd RE, kommer den extra längden på castle nut att förhindra att karbin-kolven fälls helt.
Egenskaper och förbättringar
- 0,1 tum längre än standard TDP-spec castle nut.
- Staking notches vinkel ändrad från 45 till 30 grader, vilket ger längre (25% längre än TDP-spec) och djupare notches än på TDP castle nuts.
- Antalet staking notches ökat från 3 till 4, jämnt fördelade på CNF. Castle nut ska stakas på två ställen, FCD rekommenderar inte staking på mer än två ställen. CNF:s 4 staking notches innebär att 3 alltid kommer att vara synliga och tillgängliga för staking, vilket ger användaren fler alternativ för staking.
- Grova serrationer på nyckelsidan av muttern, en engångsfunktion för att underlätta rotation av CNF mot ändplattan.
FCD anser att en castle nut ska stakas enligt TM, och CNF:s och CN5F:s längre och djupare notches stärker denna tro; när den väl är installerad och stakad kommer den inte att lossna utan användarens avsiktliga åtgärd. Forward Controls Design gillar idén om snabbkoppling, men vissa saker på en AR är avsedda att stanna på plats, och betydande ansträngningar har gjorts för att säkerställa detta av de ursprungliga designers. CNF och CN5F är en fortsättning och utveckling i den riktningen.
CN5F är tillverkad av billet i 4140 PH stål och svart nitrerad (Cerakoted FDE, OD grön och bränd brons är också tillgängliga). Som med allt som Forward Controls Design producerar, är den stolt tillverkad i USA.
Vikt: 0,51 oz
Material: 4140 PH
Tillverkad i: USA