Upgrade the bolt handle assembly in the 10/22® Slick guide rod for easy racking Interchangeable tuning springs:(White=standard, Red=10% increase, Green=10% decrease) This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. All bolt handle lengths are 1 3/4", which is 1/4" longer than the factory bolt handle assembly kit giving greater clearance for the shooter's knuckles while racking the bolt. The three tuning springs come in varying tensions for the ultimate in tuning capability. Though by and large the standard tension spring will serve the shooter throughout the different ammunition velocities. If, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync then the shooter has the capability to change the spring without using the more primitive method of cutting coils to tune a spring. Handle Weights: black 762 (modified z shape flute)= .3 oz Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry. Packaging Includes: bolt handle guide rod 3 tuning springs Installation instructions: After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin, trigger and stock. The video below offers some of the finer installation points.
Uppgradera din Ruger 10/22 med detta fantastiska kit!
GUIDE ROD & SPRING KIT för Ruger 10/22 är den perfekta uppgraderingen för din rifle. Med en slick guide rod och utbytbara fjädrar kan du enkelt justera rekyl och förbättra din skytteupplevelse.
Produktbeskrivning
Detta uppgraderingskit för din 10/22® ger dig en bekväm bolt handle att greppa, en "super slick" guide rod och möjligheten att ställa in rekyl med våra utbytbara fjädrar. Alla bolt handle-längder är 1 3/4", vilket är 1/4" längre än den fabriksmonterade bolt handle-assemblagen, vilket ger större utrymme för skyttens knogar vid racking av bolten.
Funktioner
- Utbytbara tuning springs: (Vit=standard, Röd=10% ökning, Grön=10% minskning)
- Precision ground guide rod tillverkad av härdat verktygsstål med en tolerans på 2/10,000"
- Nitride-behandlad för en ythårdhet på 70C Rockwell (hårdare än en fil)
- Garanti för den smidigaste och slickaste guide rod i branschen
Installation
För att installera, ta bort kolven från den barreled action, ta bort avtryckaren och bolt stop. Detta ger nödvändig klarhet för att ta bort bolten tillsammans med bolt handle-assemblagen. Välj din rätta fjäderspänning och sätt in bolt handle-assemblagen från utdragningsporten, placera konänden av staven i containment-hålet i mottagaren. Komprimera helt bolt handle-assemblagen medan du placerar bolten på den. Efter att bolt handle och bolt har kopplats samman, släpp containment så att bolten kan gå framåt. Installera bolt stop pin, avtryckare och kolv. Videon nedan erbjuder några av de finare installationspunkterna.
Förpackningen inkluderar:
- Bolt handle
- Guide rod
- 3 tuning springs