Introducing the newest addition to the EGW lineup: The Hunter series picatinny scope mount. EGW saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what they came up with. After countless hours of prototyping and testing, the Hunter mount was born. Featuring: 7075 T6 aluminum for an extremely durable yet lightweight construction. Type III hardcoat anodizing protects the mount from whatever nature can throw at it. Chamfered edges provide a snag free hunt. A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts. This mount comes standard with a bevel on both sides making it ambidextrous. The bolt pattern on the Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. They machine these in our shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). EGW recommends: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Bergara B14 Long Action (#6 Screws) Bergara Premier Long Action (#8 Screws) Remington 700 Long Action Remington 700 Long Action (#8 Screws) Remington 700 Long Action Police Tactical (#8 Screws) Remington 721 Long Action Remington 725 Long Action Christensen Arms Long Action Mauser M18 (All Calibers) Sauer 100 (All Calibers) Sauer 101 (All Calibers)
Upptäck den senaste innovationen från EGW: Hunter-serien Picatinny-siktefäste!
EGW har identifierat behovet av ett kortare, lättare och robust Picatinny-siktefäste, och resultatet är Hunter-fästet. Efter otaliga timmar av prototyper och tester föddes Hunter-fästet.
Funktioner:
- Material: 7075 T6 aluminium för en extremt hållbar men lätt konstruktion.
- Ytbehandling: Typ III hårdanodisering skyddar fästet från naturens påfrestningar.
- Design: Fasad kanter för en snag-fri jakt.
- Vikt: Kompakt längd som minskar vikten med 15% jämfört med andra Heavy Duty-fästen.
- Ambidextrous: Standard med en fas på båda sidor.
Skruvmönstret på Remington 700 Long Action-fästet passar Long Action Remington 700 gevär (exempelvis 30-06, 300 Win mag), samt 740 och 40x. Trots vad du kan ha hört, passar inte Remington 700-fästet Howa 1500 eller Weatherby Vanguard. Skruvmönstret är liknande, men resten av fästet (utkastport, längd, etc.) gör det oanvändbart på dessa två gevär. EGW rekommenderar att du mäter avståndet mellan hålen i din mottagare för att bekräfta att det matchar de publicerade dimensionerna.
Picatinny-korsspår löper längs hela skenan, vilket ger skytten flexibilitet vid montering av siktet och andra tillbehör. Kanalen i mitten minskar den totala massan av fästet. Dessutom kommer det i många fall inte att hindra användningen av fabriksjärnsikten. EGW:s enstycksfästen är det uppenbara valet för både jägare och taktiska skyttar.
Fästena tillverkas i deras verkstad med hjälp av en av deras bearbetningsmaskiner. Efter bearbetning tumlas fästena, sandblästras och anodiseras av typ III för långvarig hållbarhet.
Installation:
EGW rekommenderar 20 tum-lbs av vridmoment och en droppe blå loctite (loctite säljs separat).
Rekommendationer:
- 0 MOA: Om du skjuter 0-500 yards
- 20 MOA: Om du skjuter 500-1000 yards
När du nollställer ditt gevär med ett 20 MOA-fäste rekommenderar EGW att du nollställer vid 200 yards.
Hela fästet och tillbehören (från monteringsskruvar och nyckel till förpackning) är tillverkade i USA.
Detta fäste passar:
- Bergara B14 Long Action (#6 skruvar)
- Bergara Premier Long Action (#8 skruvar)
- Remington 700 Long Action
- Remington 700 Long Action (#8 skruvar)
- Remington 700 Long Action Police Tactical (#8 skruvar)
- Remington 721 Long Action
- Remington 725 Long Action
- Christensen Arms Long Action
- Mauser M18 (alla kalibrar)
- Sauer 100 (alla kalibrar)
- Sauer 101 (alla kalibrar)