Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
080561000
Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
1999 1999 1 SEK
Produktnr: 080561000
BROWNELLS JAMES B. MEEK BEGINNER'S KIT Vi frågade James B. Meek, författaren till The Art Of Engraving, om hans rekommendationer. Detta är vad han skrev: "Kanske kan 90% av allt scrollarbete i gravyr göras med följande verktyg". Point Graver No. 4 kommer att skära de flesta scrolls. Fin detalj skärs med 0 Point. Knife No. 2 används också för detaljer. Square är kanske det mest använda, kan också vässas som en spets eller en mejsel, Flat Nos. 36 och 37, samt Round Nos. 50 och 54 behövs för bokstäver på hög relief. Kitet innehåller: Point - Nos. 0 och 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 och 39; Knife - No. 2; Round - Nos. 50 och 54. Totalt 9 graveringsverktyg.
1999 SEK 0 1 999,00 kr *
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.

Produktinformation

Leveransvikt: 0,091kg Leveranshöjd: 58mm Leveransbredd: 61mm Leveranslängd: 173mm

Produkt detaljer

Tillverkas i USA



Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
Nyhetsbrev