OPF-M17, ACRO, RSD is precision machined from 4140 steel, and QPQ coated. Aimpoint ACRO P1/P2 requires the plates to adhere to Aimpoint ACRO TDP with tight tolerances, OPF-M17, ACRO, RSD has proven to be the best choice among professional users. OPF-M17, ACRO, RSD is compatible with MIL issued M17/M18. It is a drop in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03. OPF-M17, ACRO, RSD is compatible with P320 X-Five Legion, Legion Carry, and DP Cut. It is not compatible with P320 Pro Cut, P320 sub compact, AXG, and RX. OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm (torque value: 20 to 25 in·lb), a T20 key, and a packet of VC-3. Proudly designed and made in the USA. ATTENTION: Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats. For the new M17/M18 and SIG P320 with the Delta Point Pro cut, Forward Controls Design is proud to offer OPF-M17, ACRO, RSD (rear sight dovetail).
Kompakt och hållbar optikmonteringsplatta för M17/M18
OPF-M17, ACRO, RSD är precisionsbearbetad från 4140 stål och QPQ-belagd. Den är designad för att uppfylla Aimpoint ACRO TDP med strikta toleranser, vilket gör OPF-M17, ACRO, RSD till det bästa valet bland professionella användare.
Produktinformation
- Kompatibilitet: OPF-M17, ACRO, RSD är kompatibel med MIL-utgivna M17/M18 och fungerar som en drop-in-adapter för utmärkta Aimpoint ACRO-sikten.
- Jämförbarhet: Den är identisk med Tangodown SSM-03.
- Specifika modeller: OPF-M17, ACRO, RSD är kompatibel med P320 X-Five Legion, Legion Carry och DP Cut. Den är inte kompatibel med P320 Pro Cut, P320 sub compact, AXG och RX.
- Leverans: OPF-M17-ACRO, RSD levereras med två M4 0.7mm x 6mm (momentvärde: 20 till 25 in·lb), en T20-nyckel och ett paket VC-3.
- Tillverkning: Stolt designad och tillverkad i USA.
Varning: För användare av Steiner MPS: MPS:s rekylklack under siktet kan variera i bredd och vara något bredare än ACRO. Om så är fallet, tryck fast MPS på plattan eller knacka försiktigt på siktet tills MPS sitter helt på plats.
För den nya M17/M18 och SIG P320 med Delta Point Pro-cut, är Forward Controls Design stolta över att erbjuda OPF-M17, ACRO, RSD (bakre sikt dovetail).