Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige

APEX TACTICAL SPECIALTIES INC
M&P RED FLAT FACE FORWARD SET TRIGGER

856008005529 100017344
The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

3349 3349 1 SEK
Produktnr: 100017344
APEX TACTICAL SPECIALTIES INC RED FLAT FACED FORWARD SET SEAR & TRIGGER KIT M&P
Tillverkarens produktnummer: 100-055 856008005529 Det nya Flat Faced Forward Set Trigger levererar en känsla och prestanda som en fabriksny 1911-typ av avtryckare med en ungefärlig vikt på 3,0 till 4,0 lbs. Designad för att fungera i vilken Smith & Wesson M&P modellpistol som helst i ett centerfire kaliber (exklusive Shield), reducerar Apex Flat Faced Forward Set Trigger Kit avtryckarens för-resa och över-resa, samtidigt som skytten kan positionera sitt finger på en ökad hävstångspunkt längre ner på avtryckarytan för att dra nytta av lägre avtryckarvikter. Flat Faced Forward Set Trigger i sig är designad för att fungera med ditt befintliga Apex Forward Set Sear kit och fungerar inte med Smith & Wesson fabrikskontroll delar. Inkluderat i hela kitet är Apex Forward Set Sear som förkortar avtryckarens slag genom att släppa slagstiftet vid en punkt längre fram än fabriks sear. Ultimate Striker Block producerar en mjukare avtryckar dragning och eliminerar de flesta problem med falsk återställning genom en förbättrad radie på slagblockets ansikte. Forward Set Springs kit producerar en avtryckarvikt på 3,0 till 4,0 lbs, beroende på vilken avtryckarreturfjäder som är installerad. Kräver användning av sear housing block designad för den stora storleken på sear plunger och fjäder (nuvarande produktion från och med juni 2011) INTE rekommenderad för tjänst/bärande applikationer. Passar inte M&P 2.0 Pistoler
3349 SEK 10 3 349,00 kr *
Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.
Funktioner: Finish: Röd Make: Smith & Wesson Modell: M&P Stil: Competition, Enhanced

Produktinformation

Finish: Röd Make: Smith & Wesson Modell: M&P Stil: Enhanced,Competition Leveransvikt: 0,005kg Leveranshöjd: 20mm Leveransbredd: 79mm Leveranslängd: 89mm

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.c



The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

Nyhetsbrev