Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
855016007983 100027272
Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
1149 1149 1 SEK
Produktnr: 100027272
SAMSON MANUFACTURING CORP POCKET COMP FOR S&W SHIELD, BLACK
Tillverkarens produktnummer: 040603101 855016007983 Designad för att passa 1/2 x 28 gängade pipor, Samson Pocket Comp för M&P Shield och Shield 2.0 9mm installeras på några minuter utan behov av vapensmed. Samsons design använder ett gängat gränssnitt som skyddar pipans gängor till skillnad från konventionella kompensatorer. Samson Pocket Comp för M&P 9 Shield smälter samman med slidens estetiska linjer, vilket skapar en bild av en slide-förlängning. Tillverkad av 7075 flygplansgrad billet, är Pocket Comp Mil-Spec hårdanodiserad för hållbarhet. Pocket Comp minskar effektivt upplevd rekyl och mynningsstigning, vilket möjliggör snabbare återhämtning mellan skott. Den fungerar med fabrikens rekylfjäder och ett brett spektrum av kulvikter och hastigheter (124gr eller tyngre rekommenderas, kan fungera med 115gr beroende på tillverkare och/eller miljöförhållanden). Gängad pipa ingår INTE Minskar upplevd rekyl och mynningsstigning, vilket möjliggör snabbare återhämtning mellan skott Idealisk för pistoler utrustade med järnsikte eller rödpunktsikte Gängas på vilken som helst 1/2x28 gängad 9mm pipa (ingår ej) Tillverkad av flygplansgrad 7075 billet med mil-std hårdanodisering för hållbarhet Ingen-vapensmed, enkel installation/avlägsnande Fungerar med fabrikens rekylfjäder och ett brett spektrum av kulvikter och hastigheter (124gr eller tyngre, kan fungera med 115gr beroende på tillverkare och temperatur)
1149 SEK 6 1 149,00 kr *
Levernastid ca. 14-21 dagar.
6 st. i centrallagret.
Funktioner: Make: Smith & Wesson Modell: M&P Shield

Produktinformation

Make: Smith & Wesson Modell: M&P Shield Leveransvikt: 0,059kg Leveranshöjd: 38mm Leveransbredd: 133mm Leveranslängd: 127mm

Produkt detaljer

Tillverkas i USA



Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
Nyhetsbrev