The ProTac series expands into weapon-mounted lights with this light featuring a dedicated fixed-mount for Picatinny rails. It uses either a remote switch with momentary/constant on operation or a standard push-button tail switch, and can run on either a lithium battery or an easy-to-find alkaline battery. ProTac Rail Mount 1 Specs: Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium CR123A lithium battery output: High: 350 lumens; 12,000 candela; 219m beam; runs 1.75 hours Low 40 lumens; 1,380 candela; 19m beam; runs 14.5 hours AA alkaline/AA lithium battery output: High: 150 lumens; 4,950 candela; 141m beam; runs 1.5 hours (alkaline); runs 4.5 hours (AA lithium) Low: 40 lumens; 1,380 candela; 19m beam; runs 8 hours (alkaline); runs 14 hours (AA lithium) Strobe for signaling or disorienting TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high Remote pressure switch features momentary and “constant on” operation Integrated rail clamp attaches to MIL-STD-1913 rails Easy to attach, secure mounting Includes remote pressure switch, push-button tail switch, remote retaining clips, double-sided tape and zip ties Durable, anodized aluminum construction with impact-resistant tempered glass lens IPX7 rated with the Standard button switch installed; waterproof to 1 meter for 30 minutes. IPX4 rated with the Remote Pressure Switch installed Operating temperature: -40°F to +120°F Limited lifetime warranty RoHS compliant ProTac Rail Mount 2 Specs: TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high High: 625 lumens; 22,000 candela; 297m beam; runs 2 hours Low: 60 lumens; 2,000 candela; 89m beam; runs 21 hours Strobe for signaling or disorienting Remote pressure switch features momentary and “constant on” operation Integrated rail clamp attaches to MIL-STD-1913 rails Easy to attach, secure mounting Includes remote pressure switch, push-button tail switch, remote retaining clips, double-sided tape and zip ties Uses two CR123A lithium batteries (included) Durable, anodized aluminum construction with impact-resistant tempered glass lens IPX7 rated with the Standard button switch installed; waterproof to 1 meter for 30 minutes. IPX4 rated with the Remote Pressure Switch installed Operating temperature: -40°F to +120°F Limited lifetime warranty RoHS compliant Protac Rail Mount HL-X Long Gun Light Specs: The ProTac Rail Mount HL-X is a 1,000 lumen weapon-mounted light featuring a dedicated fixed-mount for Picatinny rails. It uses either a remote switch or a standard push-button tail switch, and can run on multiple battery sources. High for maximum illumination: 1,000 lumens; 332m beam; runs 1.25 hours (CR123A batteries); runs 1.5 hours (18650 battery); 27,600 candela Low for extended run time: 60 lumens; 80m beam; runs 20 hours (CR123A batteries); runs 23 hours (18650 battery); 1,600 candela Strobe for signaling or disorienting: runs 2.5 hours (CR123A batteries); runs 3.25 hours (18650 battery) Dual fuel - uses two CR123A lithium batteries (included); also accepts one Streamlight rechargeable 18650 lithium ion battery Easy to use pressure switch comes with a button for on/off and a pressure switch for momentary activation. Integrated rail clamp attaches to MIL-STD-1913 rails Durable, anodized aluminum construction with impact-resistant tempered glass lens IPX7 rated with the Standard button switch installed; waterproof to 1 meter for 30 minutes. IPX4 rated with the Remote Pressure Switch installed Operating temperature: -40°F to +120°F Anti-roll head Includes two CR123A lithium batteries, remote pressure switch, push-button tail switch, remote retaining clips, double-sided tape and zip ties Solid State power regulation provides maximum light output throughout battery life RoHS compliant
Kraftfull och mångsidig vapentillbehör för alla skjutbehov
ProTac Rail Mount 1 Long Gun Light från Streamlight är en innovativ och pålitlig lampa som är speciellt designad för att monteras på Picatinny-skenor. Denna lampa erbjuder en rad funktioner som gör den till ett utmärkt val för både professionella och hobbyister.
Produktbeskrivning
ProTac Rail Mount 1 är utrustad med en fast montering som gör den enkel att fästa på ditt vapen. Den kan användas med en fjärrkontroll för momentant eller konstant ljus, eller med en standard tryckknapp på svansen. Lampan kan drivas av en litiumbatteri eller ett lättillgängligt alkaliskt batteri.
Specifikationer:
- Dual fuel: Använder ett AA alkaliskt batteri eller CR123A litiumbatteri (båda ingår); accepterar även AA litium.
- CR123A litiumbatteri utgång:
- Hög: 350 lumen; 12,000 candela; 219m stråle; fungerar i 1.75 timmar.
- Låg: 40 lumen; 1,380 candela; 19m stråle; fungerar i 14.5 timmar.
- AA alkaliskt/AA litiumbatteri utgång:
- Hög: 150 lumen; 4,950 candela; 141m stråle; fungerar i 1.5 timmar (alkaliskt); fungerar i 4.5 timmar (AA litium).
- Låg: 40 lumen; 1,380 candela; 19m stråle; fungerar i 8 timmar (alkaliskt); fungerar i 14 timmar (AA litium).
- Strobe: För signalering eller desorientering.
- TEN-TAP® Programmering: Valt av tre driftslägen: 1.) hög/strobe; 2.) hög endast; 3.) låg/hög.
- Fjärrtryckknapp: Momentant och "konstant på" drift.
- Integrerad skenklämma: Fäster på MIL-STD-1913-skenor.
- Vattentålig: IPX7 med standardknapp installerad; vattentålig upp till 1 meter i 30 minuter.
- Driftstemperatur: -40°F till +120°F.
- Begränsad livstidsgaranti.
- RoHS-kompatibel.
Med sin hållbara, anodiserade aluminiumkonstruktion och slagresistenta härdade glaslins är ProTac Rail Mount 1 en pålitlig följeslagare för alla dina skyttebehov. Oavsett om du är på jakt eller på skjutbanan, kommer denna lampa att leverera kraftfullt och pålitligt ljus.