Produktinformation
- Leveransvikt: 0,272kg
- Leveranshöjd: 1mm
- Leveransbredd: 83mm
- Leveranslängd: 146mm
Produktnr: 749010851
Dessa Drop Tube Adapters är de adaptrar som behövs för att låta dina Redding pulvermätare acceptera Sinclair Custom Drop Tubes. Tillverkade av rostfritt stål, dessa adaptrar ersätter dina befintliga drop tubes och gör att du kan använda Custom Drop Tubes i olika längder. Fungerar med antingen Redding Measure-stativet eller Sinclair Powder Measure-stativet.Utgått från Brownells
Dessa Drop Tube Adaptorer är nödvändiga för att låta dina Redding powder measures acceptera de anpassade Drop Tubes från Sinclair. Tillverkade av rostfritt stål, ersätter dessa adaptrar dina befintliga drop tubes och gör det möjligt för dig att använda Custom Drop Tubes i olika längder.
Uppgradera din utrustning och förbättra din precision med Redding Drop Tube Adapter från Sinclair International.
Takes some work to use 2012-09-07
I bought this adapter to use with my Redding 3BR measure. It's the one on the right in the image. It comes with no instructions, but it was fairly obvious that the short green drop tube on the 3BR had to go. I tried twisting it off while holding it in a small hobby vise. No joy. So I tried a bigger vise with serrated jaws and it came off without too much marring. Next, the adaptor would only screw on for about a half turn. The threadform in the adapter is different than on the 3BR. So, I stuck the adpater in the same vise with a towel around it and used the 3BR as a thread. Using some oil and many back and forth turns, the adapter threads were deepened enough to screw on by hand. When steel goes against aluminum, steel wins. Now that it is installed, I am happy with it, although it is a bit marred. Nonetheless, it should have fit right off.
Vi stötte på ett fel när vi laddade innehållet. Vänligen uppdatera sidan för att fortsätta. Om problemet kvarstår, kontakta vår kundtjänst.