Lightweight Mount With The Strength Of Steel & Only 1/3 The Weight
MIL-STD 1913 Picatinny rail is machined from lightweight Tennalum® 7068 alloy that gives the same strength as steel with only ¹/³ the weight. All contact surfaces are stress relieved and pre-ground before final machining to exact MIL-STD 1913 dimensions. Integral recoil lug and elongated mounting screws let you position the rail so the lug will bear properly against the receiver to prevent the rail from moving even under aggressive recoil. Built in 20 MOA of elevation for extended long-range shooting. All surfaces are fully chamfered, with extra clearance over the ejection port.
SPECS: Tennalum 7068 alloy, hardcoat anodized, matte black finish. Instructions and 6-48 mounting screws included. Short Action (SA) – 6½" (16.5 cm) long, .380” (9.4 mm) high at front ring, 2.3 oz. (.65g) wt.
Mer...
Lättviktsmontage Med Stålens Styrka & Endast 1/3 Av Vikten
MIL-STD 1913 Picatinny-skena är bearbetad från lätt Tennalum® 7068-legering som ger samma styrka som stål med endast ¹/³ av vikten. Alla kontaktytor är spänningsavlastade och förslipade innan slutlig bearbetning till exakta MIL-STD 1913-dimensioner. Integrerad rekylklack och förlängda monteringsskruvar gör att du kan positionera skenan så att klacken stödjer korrekt mot mottagaren för att förhindra att skenan rör sig även under aggressiv rekyl. Inbyggd 20 MOA höjning för skjutning på längre avstånd. Alla ytor är helt avfasade, med extra utrymme över utkastarporten.
SPECS: Tennalum 7068-legering, hårdanodiserad, mattsvart finish. Instruktioner och 6-48 monteringsskruvar ingår. Kort aktion (SA) – 16,5 cm lång, 9,4 mm hög vid främre ringen, vikt 2,3 oz. (65g).
Mer...
Kundernas betyg påPRECISION ARMAMENT REMINGTON 700 PICATINNY SCOPE BASE, SA
Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 5
Very High Quality Base!(2013-05-11)
I am very happy with this purchase! The quality of this base is amazing. I bought this on a whim over another manufacture that is know for making very good products. I am definitely glad that I gave this base a chance. The anodizing on it is very nice finish. It does not have any sharp edges and the recoil lug is just the right size. It fits perfectly on my Remington 700 I do not have any gap at all. It is obvious that no corner were skipped in the making this base. I would recommend this base without hesitation. It is worth the money!
No bedding was needed(2014-01-15)
There were several mounts available, and I chose this one ONLY because another reviewer stated that he did not need to bed the mount to the rifle.
I also had no need to bed the mount.
I only put in the front two bolts and hand tightened. Checking the back of the mount, no light comes through and a dollar bill can not fit between the mount and rifle receiver. Removed the two screws, and put in the rear two bolts and hand tightened. Checking the front of the mount, no light comes through and a dollar bill can not fit.
I don't know if people need to bed their mount because of problems with the mount or problems with the receiver. I am just happy that in my case there was no bedding necessary.
Also a big thanks to Brownell staff for helping me select the right mount and rings.
No bedding needed. Excellent fit/finish(2015-05-06)
This unit is lightweight, but quite strong. The finish is even and matches the stock finish of my Remington 700 well. No bedding was needed to install the mount on the receiver, which is a huge plus. The machining is excellent. There are other great mounts out there, but this one is also a great price comparatively. I would not hesitate to buy another one for any future builds.
Produktnr: 100011239 PRECISION ARMAMENT REMINGTON 700 PICATINNY SCOPE BASE, SA Tillverkarens produktnummer: A12001 MIL-STD 1913 Picatinny-skena är bearbetad från lätt Tennalum® 7068-legering som ger samma styrka som stål med endast ¹/³ av vikten. Alla kontaktytor är spänningsavlastade och förslipade innan slutlig bearbetning till exakta MIL-STD 1913-dimensioner. Integrerad rekylklack och förlängda monteringsskruvar gör att du kan positionera skenan så att klacken stödjer korrekt mot mottagaren för att förhindra att skenan rör sig även under aggressiv rekyl. Inbyggd 20 MOA höjning för skjutning på längre avstånd. Alla ytor är helt avfasade, med extra utrymme över utkastarporten.
1949SEK31 949,00 kr
*
Levernastid ca. 14-21 dagar. 3 st. i centrallagret.
Lightweight Mount With The Strength Of Steel & Only 1/3 The Weight
MIL-STD 1913 Picatinny rail is machined from lightweight Tennalum® 7068 alloy that gives the same strength as steel with only ¹/³ the weight. All contact surfaces are stress relieved and pre-ground before final machining to exact MIL-STD 1913 dimensions. Integral recoil lug and elongated mounting screws let you position the rail so the lug will bear properly against the receiver to prevent the rail from moving even under aggressive recoil. Built in 20 MOA of elevation for extended long-range shooting. All surfaces are fully chamfered, with extra clearance over the ejection port.
SPECS: Tennalum 7068 alloy, hardcoat anodized, matte black finish. Instructions and 6-48 mounting screws included. Short Action (SA) – 6½" (16.5 cm) long, .380” (9.4 mm) high at front ring, 2.3 oz. (.65g) wt.
Mer...
Lättviktsmontage Med Stålens Styrka & Endast 1/3 Av Vikten
MIL-STD 1913 Picatinny-skena är bearbetad från lätt Tennalum® 7068-legering som ger samma styrka som stål med endast ¹/³ av vikten. Alla kontaktytor är spänningsavlastade och förslipade innan slutlig bearbetning till exakta MIL-STD 1913-dimensioner. Integrerad rekylklack och förlängda monteringsskruvar gör att du kan positionera skenan så att klacken stödjer korrekt mot mottagaren för att förhindra att skenan rör sig även under aggressiv rekyl. Inbyggd 20 MOA höjning för skjutning på längre avstånd. Alla ytor är helt avfasade, med extra utrymme över utkastarporten.
SPECS: Tennalum 7068-legering, hårdanodiserad, mattsvart finish. Instruktioner och 6-48 monteringsskruvar ingår. Kort aktion (SA) – 16,5 cm lång, 9,4 mm hög vid främre ringen, vikt 2,3 oz. (65g).
Mer...
Kundernas betyg påPRECISION ARMAMENT REMINGTON 700 PICATINNY SCOPE BASE, SA
Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 5
Very High Quality Base!(2013-05-11)
I am very happy with this purchase! The quality of this base is amazing. I bought this on a whim over another manufacture that is know for making very good products. I am definitely glad that I gave this base a chance. The anodizing on it is very nice finish. It does not have any sharp edges and the recoil lug is just the right size. It fits perfectly on my Remington 700 I do not have any gap at all. It is obvious that no corner were skipped in the making this base. I would recommend this base without hesitation. It is worth the money!
No bedding was needed(2014-01-15)
There were several mounts available, and I chose this one ONLY because another reviewer stated that he did not need to bed the mount to the rifle.
I also had no need to bed the mount.
I only put in the front two bolts and hand tightened. Checking the back of the mount, no light comes through and a dollar bill can not fit between the mount and rifle receiver. Removed the two screws, and put in the rear two bolts and hand tightened. Checking the front of the mount, no light comes through and a dollar bill can not fit.
I don't know if people need to bed their mount because of problems with the mount or problems with the receiver. I am just happy that in my case there was no bedding necessary.
Also a big thanks to Brownell staff for helping me select the right mount and rings.
No bedding needed. Excellent fit/finish(2015-05-06)
This unit is lightweight, but quite strong. The finish is even and matches the stock finish of my Remington 700 well. No bedding was needed to install the mount on the receiver, which is a huge plus. The machining is excellent. There are other great mounts out there, but this one is also a great price comparatively. I would not hesitate to buy another one for any future builds.